SweetFX Settings DB
Latest forum threads
5 hours, 18 minutes ago
1 week, 2 days ago
by Noirze
1 week, 2 days ago
by ytu1m

| KEBYKepoW | Sharpin' HDR config

Created by kebykepow
Added April 25, 2015
Updated 26 Apr 17:38 CEST
Shader used: SweetFX 2.0
Preset description:
/*===========================================// // Description // //===========================================// Game: Grand Theft Auto 5 Author: KEBYKepoW (edited from K-putt) SweetFX/Injector version: v2.0 Preview 8 by CeeJay.dk / ReShade 0.16.0 Description: • LUMASHARPEN • HDR Bit more contrast in lighting and sharping the game cuz of fxaa, it will also improve skylight intensity. Install: Drop all files in GTA V main Directory any questions? ask them here, in the comments: https://www.youtube.com/watch?v=AVcVo8daEmw
Download preset Show / Hide settings
/*===========================================// // Description // //===========================================// Game: Grand Theft Auto 5 Author: KEBYKepoW (edited from K-putt) SweetFX/Injector version: v2.0 Preview 8 by CeeJay.dk / ReShade 0.16.0 Description: • LUMASHARPEN • HDR //===========================================// // Optional // //===========================================// • To enable SMAA set #define USE_SMAA to 1 //===========================================// // Miscellaneous // //===========================================// • (v2.0 Preview 8 by CeeJay.dk | ReShade 0.16.0) • DOWNLOAD HERE • sfx.thelzay.net //============================================// // Choose // // Effects // //============================================*/ // Effects are listed in the order that they are applied. // Set to 1 for ON or 0 for OFF #define USE_ASCII 0 //[0 or 1] Ascii : Converts the image to Ascii-art. #define USE_CARTOON 0 //[0 or 1] Cartoon : "Toon"s the image. #define USE_SMAA 0 //[0 or 1] SMAA Anti-aliasing : Smoothens jagged lines using the SMAA technique. #define USE_FXAA 0 //[0 or 1] FXAA Anti-aliasing : Smoothens jagged lines using the FXAA technique. #define USE_EXPLOSION 0 //[0 or 1] Explosion : Scatters the pixels, making the image look fuzzy. #define USE_CA 0 //[0 or 1] Chromatic Aberration : Mimics the look of a cheap camera lens, by distorting the colors. #define USE_ADVANCED_CRT 0 //[0 or 1] Advanced CRT : Simulates an old CRT TV display. (has a very high performance cost) #define USE_PIXELART_CRT 0 //[0 or 1] PixelArt CRT : Scanlines for pixel art (high performance cost) #define USE_BLOOM 0 //[0 or 1] Bloom : Makes bright lights bleed their light into their surroundings (relatively high performance cost) #define USE_HDR 1 //[0 or 1] HDR : Not actual HDR - It just tries to mimic an HDR look (relatively high performance cost) #define USE_LUMASHARPEN 1 //[0 or 1] LumaSharpen : Sharpens the image. #define USE_LEVELS 0 //[0 or 1] Levels : Sets a new black and white point. This increases contrast but causes clipping. Use Curves instead if you want to avoid that. #define USE_TECHNICOLOR 0 //[0 or 1] TECHNICOLOR : Attempts to mimic the look of an old movie using the Technicolor three-strip color process (Techicolor Process 4) #define USE_DPX 0 //[0 or 1] Cineon DPX : Should make the image look like it's been converted to DXP Cineon - basically it's another movie-like look similar to technicolor. #define USE_MONOCHROME 0 //[0 or 1] Monochrome : Monochrome makes the colors disappear. #define USE_COLORMATRIX 0 //[0 or 1] Color Matrix : Allows color modification using a user-defined color matrix. #define USE_LIFTGAMMAGAIN 0 //[0 or 1] Lift Gamma Gain : Adjust brightness and color of shadows, midtones and highlights. #define USE_TONEMAP 0 //[0 or 1] Tonemap : Adjust gamma, exposure, saturation, bleach and defog. (may cause clipping) #define USE_VIBRANCE 0 //[0 or 1] Vibrance : Intelligently saturates (or desaturates if you use negative values) the pixels depending on their original saturation. #define USE_CURVES 0 //[0 or 1] Curves : Contrast adjustments using S-curves. #define USE_SEPIA 0 //[0 or 1] Sepia : Sepia tones the image. #define USE_VIGNETTE 0 //[0 or 1] Vignette : Darkens the edges of the image to make it look more like it was shot with a camera lens. May cause banding artifacts. #define USE_FILMGRAIN 0 //[0 or 1] Film Grain : Adds film grain to the image. #define USE_DITHER 0 //[0 or 1] Dither : Applies dithering to simulate more colors than your monitor can display. This lessens banding artifacts (mostly caused by Vignette) #define USE_BORDER 0 //[0 or 1] Border : Can be used to create letterbox borders around the image. #define USE_SPLITSCREEN 0 //[0 or 1] Splitscreen : Enables the before-and-after splitscreen comparison mode. #define USE_TRANSITION 0 //[0 or 1] Transition : Shows a welcome screen and then transitions to the regularly scheduled programming #define USE_DISPLAY_DEPTH 0 //[0 or 1] Display Depth : Enables the possibility to display the depth buffer - You will still need to toogle it on/off with (*) in-game #define USE_CUSTOM 0 //[0 or 1] Custom : Write your own shader by editing custom.h, and then enable it here. //===========================================// // Ascii // // Settings // //===========================================// #define Ascii_input_image 1 //[1 or 2] 1 = Color buffer, 2 = Depth buffer. #define Ascii_spacing 1 //[0 to 9] Determines the spacing between characters. I feel 1 to 3 looks best. #define Ascii_font 1 //[1 or 2] 1 = 5x5 font, 2 = 3x5 font #define Ascii_font_color float3(255, 255, 255) //[0 to 255, 0 to 255, 0 to 255] What color the font should be. In integer RGB colors. #define Ascii_background_color float3(0, 0, 0) //[0 to 255, 0 to 255, 0 to 255] What color the background should be. In integer RGB colors. #define Ascii_swap_colors 0 //Swaps the font and background color when you are too lazy to edit the settings above (I know I am) #define Ascii_invert_brightness 0 //[0 or 1] #define Ascii_font_color_mode 1 //[0 to 2] 0 = font_color, 1 = image color, 2 = colorized grayscale //===========================================// // SMAA Anti Aliasing // // Settings // //===========================================// #define SMAA_THRESHOLD 0.08 //[0.05 to 0.20] Edge detection threshold. If SMAA misses some edges try lowering this slightly. I prefer between 0.08 and 0.12. #define SMAA_MAX_SEARCH_STEPS 25 //[0 to 98] Determines the radius SMAA will search for aliased edges #define SMAA_MAX_SEARCH_STEPS_DIAG 12 //[0 to 16] Determines the radius SMAA will search for diagonal aliased edges #define SMAA_CORNER_ROUNDING 25 //[0 to 100] Determines the percent of antialiasing to apply to corners. 0 seems to affect fine text the least so it's the default. // -- Advanced SMAA settings -- #define SMAA_EDGE_DETECTION 2 //[1|2|3] 1 = Luma edge detection, 2 = Color edge detection, 3 = Depth edge detection #define SMAA_DIRECTX9_LINEAR_BLEND 0 //[0 or 1] Using DX9 HARDWARE? (software version doesn't matter) if so this needs to be 1 - If not, leave it at 0. //Enable this only if you use a Geforce 7xxx series or older card, or a Radeon X1xxx series or older card. // -- SMAA Predication settings -- #define SMAA_PREDICATION 0 //[0 or 1] Enables predication which uses BOTH the color and the depth texture for edge detection to more accurately detect edges. #define SMAA_PREDICATION_THRESHOLD 0.09 // Threshold to be used in the depth buffer. #define SMAA_PREDICATION_SCALE 1.0 // How much to scale the global threshold used for luma or color edge detection when using predication #define SMAA_PREDICATION_STRENGTH 20.4 // How much to locally decrease the threshold. // -- Debug SMAA settings -- #define SMAA_DEBUG_OUTPUT 0 //[0 to 4] 0 = Normal, 1 = edgesTex, 2 = blendTex, 3 = areaTex, 4 = searchTex - Only for troubleshooting. Users don't need to mess with this. //===========================================// // FXAA Anti Aliasing // // Settings // //===========================================// #define FXAA_QUALITY__PRESET 9 //[1 to 9] Choose the quality preset. 9 is the highest quality. #define fxaa_Subpix 0.35 //[0.000 to 1.000] Choose the amount of sub-pixel aliasing removal. Higher values makes the image softer/blurrier. #define fxaa_EdgeThreshold 0.01 //[0.000 to 1.000] Edge detection threshold. The minimum amount of local contrast required to apply algorithm. Similar to SMAA_THRESHOLD #define fxaa_EdgeThresholdMin 0.01 //[0.000 to 1.000] Darkness threshold. Pixels darker than this are not processed in order to increase performance. //===========================================// // Explosion // // Settings // //===========================================// #define Explosion_Radius 2.0 //[0.2 to 100.0] Amount of effect you want. //===========================================// // Chromatic Aberration // // Settings // //===========================================// #define Chromatic_shift float2(2.5,-0.5) //[-100.0 to 100.0, -100.00 to 100.0] Distance (X,Y) in pixels to shift the color components. //For a slightly blurred look try fractional values (.5) between two pixels. #define Chromatic_strength 0.1 //Adjust the strength of the effect. //===========================================// // Levels // // Settings // //===========================================// #define Levels_black_point 8 //[0 to 255] The black point is the new black - literally. Everything darker than this will become completely black. Default is 16.0 #define Levels_white_point 255 //[0 to 255] The new white point. Everything brighter than this becomes completely white. Default is 235.0 //Colors between the two points will stretched, which increases contrast, but details above and below the points are lost. // -- Debug settings -- #define Levels_highlight_clipping 0 //[0 or 1] Highlight the pixels that clip. Red = Some detail is lost in the highlights, Yellow = All detail is lost in the highlights, // Blue = Some detail is lost in the shadows, Cyan = All detail is lost in the shadows. //===========================================// // Cartoon // // Settings // //===========================================// #define CartoonPower 1.5 //[0.1 to 10.0] Amount of effect you want. #define CartoonEdgeSlope 1.5 //[0.1 to 8.0] Raise this to filter out fainter edges. You might need to increase the power to compensate. Whole numbers are faster. //===========================================// // Advanced CRT // // Settings // //===========================================// #define CRTAmount 1.00 //[0.00 to 1.00] Amount of CRT effect you want #define CRTResolution 2.0 //[1.0 to 8.0] Input size coefficent (low values gives the "low-res retro look"). Default is 1.2 #define CRTgamma 2.2 //[0.0 to 4.0] Gamma of simulated CRT (default 2.2) #define CRTmonitorgamma 2.4 //[0.0 to 4.0] Gamma of display monitor (typically 2.2 is correct) #define CRTBrightness 1.2 //[1.0 to 3.0] Used to boost brightness a little. Default is 1.0 #define CRTScanlineIntensity 2.0 //[2.0 to 4.0] Scanlines intensity (use integer values preferably). Default is 2.0 #define CRTScanlineGaussian 1 //[0 or 1] Use the "new nongaussian scanlines bloom effect". Default is on #define CRTCurvature 1 //[[0 or 1] "Barrel effect" enabled (1) or off (0) #define CRTCurvatureRadius 2.0 //[0.0 to 2.0] Curvature Radius (only effective when Curvature is enabled). Default is 1.5 #define CRTCornerSize 0.0100 //[0.0000 to 0.0020] Higher values, more rounded corner. Default is 0.001 #define CRTDistance 2.00 //[0.00 to 4.00] Simulated distance from viewer to monitor. Default is 2.00 #define CRTAngleX 0.00 //[-0.20 to 0.20] Tilt angle in radians (X coordinates) #define CRTAngleY -0.15 //[-0.20 to 0.20] Tilt angle in radians (Y coordinates). (Value of -0.15 gives the 'arcade tilt' look) #define CRTOverScan 1.00 //[1.00 to 1.10] Overscan (e.g. 1.02 for 2% overscan). Default is 1.01 #define CRTOversample 0 //[0 or 1] Enable 3x oversampling of the beam profile (warning : performance hit) //===========================================// // Pixel-Art CRT // // Settings // //===========================================// // -- Emulated input resolution -- #define PixelArtCRT_resolution_mode 1 //[1 or 2] 1 = Ratio, 2 = Fixed resolution #define PixelArtCRT_resolution_ratio (1.0/4.0) // #define PixelArtCRT_fixed_resolution float2(320.0,160.0) // -- Hardness -- #define PixelArtCRT_hardScan -24.0 // Hardness of scanline : -8.0 = soft, -16.0 = medium #define PixelArtCRT_hardPix -24.0 // Hardness of pixels in scanline : -2.0 = soft, -4.0 = hard // -- Display warp -- #define PixelArtCRT_warp float2(1.0/64.0,1.0/24.0) // Display warp : 0.0 = none , 1.0/8.0 = extreme // -- Type of shadow mask -- #define PixelArtCRT_ShadowMask 3 // Type of shadow mask : 1 = Very compressed TV style shadow mask, 2 = Aperture-grille // 3 = Stretched VGA style shadow mask, 4 = VGA style shadow mask // -- Amount of shadow mask -- #define PixelArtCRT_maskDark 0.5 // #define PixelArtCRT_maskLight 1.5 // // -- Falloff shape -- #define PixelArtCRT_shape 3.0 // Falloff shape : 1.0 = exp(x), 1.25 = in between, 2.0 = gaussian, 3.0 = more square // -- Amp signal -- #define PixelArtCRT_overdrive 1.25 // //===========================================// // Bloom // // Settings // //===========================================// #define BloomThreshold 20.25 //[0.00 to 50.00] Threshold for what is a bright light (that causes bloom) and what isn't. #define BloomPower 1.446 //[0.000 to 8.000] Strength of the bloom #define BloomWidth 0.0142 //[0.0000 to 1.0000] Width of the bloom //===========================================// // HDR // // Settings // //===========================================// #define HDRPower 1.06 //[0.00 to 8.00] Strangely lowering this makes the image brighter #define radius2 0.82 //[0.00 to 8.00] Raising this seems to make the effect stronger and also brighter //===========================================// // Lumasharpen // // Settings // //===========================================// // -- Sharpening -- #define sharp_strength 0.5 //[0.10 to 3.00] Strength of the sharpening #define sharp_clamp 0.025 //[0.000 to 1.000] Limits maximum amount of sharpening a pixel recieves - Default is 0.035 // -- Advanced sharpening settings -- #define pattern 2 //[1|2|3|4] Choose a sample pattern. 1 = Fast, 2 = Normal, 3 = Wider, 4 = Pyramid shaped. #define offset_bias 1.0 //[0.0 to 6.0] Offset bias adjusts the radius of the sampling pattern. //I designed the pattern for offset_bias 1.0, but feel free to experiment. // -- Debug sharpening settings -- #define show_sharpen 0 //[0 or 1] Visualize the strength of the sharpen (multiplied by 4 to see it better) //===========================================// // Technicolor // // Settings // //===========================================// #define TechniAmount 0.40 //[0.00 to 1.00] #define TechniPower 4.00 //[0.00 to 8.00] #define redNegativeAmount 0.88 //[0.00 to 1.00] #define greenNegativeAmount 0.88 //[0.00 to 1.00] #define blueNegativeAmount 0.88 //[0.00 to 1.00] //===========================================// // Cineon DPX // // Settings // //===========================================// #define Red 8.0 //[1.0 to 15.0] #define Green 8.0 //[1.0 to 15.0] #define Blue 8.0 //[1.0 to 15.0] #define ColorGamma 2.5 //[0.1 to 2.5] Adjusts the colorfulness of the effect in a manner similar to Vibrance. 1.0 is neutral. #define DPXSaturation 3.0 //[0.0 to 8.0] Adjust saturation of the effect. 1.0 is neutral. #define RedC 0.36 //[0.60 to 0.20] #define GreenC 0.36 //[0.60 to 0.20] #define BlueC 0.34 //[0.60 to 0.20] #define Blend 0.2 //[0.00 to 1.00] How strong the effect should be. //===========================================// // Monochrome // // Settings // //===========================================// #define Monochrome_conversion_values float3(0.21, 0.72, 0.07) //[0.00 to 1.00] Percentage of RGB to include (should sum up to 1.00) #define Monochrome_color_saturation 0.00 //[0.00 to 2.00] Percentage of saturation to keep. Default is 0.00 , values above 1.00 boost saturation above normal. //===========================================// // Color-Matrix // // Settings // //===========================================// // Red Green Blue #define ColorMatrix_Red float3(0.817, 0.183, 0.000) //[0.00 to 1.00] How much of Red, Green and Blue the new red value should contain #define ColorMatrix_Green float3(0.333, 0.667, 0.000) //[0.00 to 1.00] How much of Red, Green and Blue the new green value should contain #define ColorMatrix_Blue float3(0.000, 0.125, 0.875) //[0.00 to 1.00] How much of Red, Green and Blue the new blue value should contain //Should sum to 1.000 if you don't wish to change the brightness #define ColorMatrix_strength 1.0 //Adjust the strength //===========================================// // Lift Gamma Gain // // Settings // //===========================================// #define RGB_Lift float3(1.006, 1.000, 0.993) //[0.000 to 2.000] Adjust shadows for Red, Green and Blue. #define RGB_Gamma float3(1.000, 1.000, 1.005) //[0.000 to 2.000] Adjust midtones for Red, Green and Blue #define RGB_Gain float3(1.010, 1.000, 0.995) //[0.000 to 2.000] Adjust highlights for Red, Green and Blue //Note that a value of 1.000 is a neutral setting that leave the color unchanged. //===========================================// // Tonemap // // Settings // //===========================================// #define Gamma 0.98 //[0.000 to 2.000] Adjust midtones. 1.000 is neutral. This setting does exactly the same as the one in Lift Gamma Gain, only with less control. #define Exposure 0.000 //[-1.000 to 1.000] Adjust exposure #define Saturation -0.1 //[-1.000 to 1.000] Adjust saturation #define Bleach 0.000 //[0.000 to 1.000] Brightens the shadows and fades the colors #define Defog 0.400 //[0.000 to 1.000] How much of the color tint to remove #define FogColor float3(-0.002, 0.0, 0.01) //[0.00 to 2.55, 0.00 to 2.55, 0.00 to 2.55] What color to remove - default is blue //===========================================// // Vibrance // // Settings // //===========================================// #define Vibrance 0.1 //[-1.00 to 1.00] Intelligently saturates (or desaturates if you use negative values) the pixels depending on their original saturation. #define Vibrance_RGB_balance float3(0.2, -0.1, 0.3) //[-10.00 to 10.00,-10.00 to 10.00,-10.00 to 10.00] // A per channel multiplier to the Vibrance strength so you can give more boost to certain colors over other //===========================================// // Curves // // Settings // //===========================================// #define Curves_mode 0 //[0|1|2] Choose what to apply contrast to. 0 = Luma, 1 = Chroma, 2 = both Luma and Chroma. Default is 0 (Luma) #define Curves_contrast 0.1 //[-1.00 to 1.00] The amount of contrast you want // -- Advanced curve settings -- #define Curves_formula 2 //[1|2|3|4|5|6|7|8|9|10|11] The contrast s-curve you want to use. //1 = Sine, 2 = Abs split, 3 = Smoothstep, 4 = Exp formula, 5 = Simplified Catmull-Rom (0,0,1,1), 6 = Perlins Smootherstep //7 = Abs add, 8 = Techicolor Cinestyle, 9 = Parabola, 10 = Half-circles. 11 = Polynomial split. //Note that Technicolor Cinestyle is practically identical to Sine, but runs slower. //I prefer 2 myself, but 3 is a nice alternative with a little more effect and it's the fastest formula. //===========================================// // Sepia // // Settings // //===========================================// #define ColorTone float3(1.40, 1.10, 0.90) //[0.00 to 2.55, 0.00 to 2.55, 0.00 to 2.55] What color to tint the image #define GreyPower 0.11 //[0.00 to 1.00] How much desaturate the image before tinting it #define SepiaPower 0.58 //[0.00 to 1.00] How much to tint the image //===========================================// // Daltonize // // Settings // //===========================================// #define Daltonize_type 1 //[1|2|3] Type of colorblindness. 1 = Protanopia (missing red spectrum), 2 = Deuteranopia (missing green spectrum) // 3 = Tritanopia (missing blue spectrum) //===========================================// // Film Grain // // Settings // //===========================================// #define FilmGrain_intensity 0.55 //[0.00 to 1.00] How visible the grain is. Higher is more visible. #define FilmGrain_variance 0.40 //[0.00 to 1.00] Controls the variance of the gaussian noise. Lower values look smoother. #define FilmGrain_SNR 4 //[0 to 16] Higher Signal-to-Noise Ratio values give less grain to brighter pixels. 0 disables this feature. // -- Advanced Film Grain settings -- #define FilmGrain_mean 0.50 //[0.00 to 1.00] The average mean of the gaussian noise. Probably best kept at the middle value (0.50) //A sideeffect of the Film Grain effect is that it also dithers the screen. //You don't need both the Film Grain and the Dither effect enabled at the same time. //===========================================// // Vignette // // Settings // //===========================================// #define VignetteType 1 //[1|2|3] 1 = Original, 2 = New, 3 = TV style #define VignetteRatio 1.00 //[0.15 to 6.00] Sets a width to height ratio. 1.00 (1/1) is perfectly round, while 1.60 (16/10) is 60 % wider than it's high. #define VignetteRadius 1.00 //[-1.00 to 3.00] lower values = stronger radial effect from center #define VignetteAmount -1.00 //[-2.00 to 1.00] Strength of black. -2.00 = Max Black, 1.00 = Max White. #define VignetteSlope 2 //[2 to 16] How far away from the center the change should start to really grow strong (odd numbers cause a larger fps drop than even numbers) #define VignetteCenter float2(0.500, 0.500) //[0.000 to 1.000, 0.000 to 1.000] Center of effect for VignetteType 1. 2 and 3 do not obey this setting. //===========================================// // Dither // // Settings // //===========================================// #define dither_method 1 //[1 or 2] 1 = Ordered dithering (very good and very fast), 2 = Random dithering (different but slightly slower dithering) //Note that the patterns used by Dither, makes an image harder to compress. //This can make your screenshots and video recordings take up more space. //===========================================// // Border // // Settings // //===========================================// #define border_width float2(0,0) //[0 to 2048, 0 to 2048] (X,Y)-width of the border. Measured in pixels. If this is set to 0,0 then the border_ratio will be used instead #define border_ratio float(3.0 / 4.0) //[0.1000 to 10.0000] Set the desired ratio for the visible area. You MUST use floating point - Integers do not work right. //Examples that work: (1680.0 / 1050.0), (16.0 / 10.0), (1.6) Examples that does NOT work right: (1680 / 1050), (16 / 10) #define border_color float3(0, 0, 0) //[0 to 255, 0 to 255, 0 to 255] What color the border should be. In integer RGB colors, meaning 0,0,0 is black and 255,255,255 is full white. //===========================================// // Splitscreen // // Settings // //===========================================// #define splitscreen_mode 1 //[1|2|3] 1 = Vertical 50/50 split, 2 = Vertical 25/50/25 split, 3 = Vertical 50/50 angled split, //[4|5|6] 4 = Horizontal 50/50 split, 5 = Horizontal 25/50/25 split, 6 = Curvy vertical 50/50 split //===========================================// // Transition // // Settings // //===========================================// #define Transition_time 5000 //[1 to 60000] Milliseconds the transition lasts (1000 milliseconds is 1 second) #define Transition_texture "curtain.jpg" //["filename"] Filename for the texture to use. Put your custom textures in SweetFX/Textures/ #define Transition_texture_width 720 //Image width. #define Transition_texture_height 480 //Image height. #define Transition_type CurtainOpen //Can be "FadeIn", "FadeOut", "CurtainOpen", "CurtainClose" or "ImageFadeOut" //===========================================// // Display // // Depth // //===========================================// #define Depth_z_near 0.08 //[0.00001 to 100000.0] Camera z near #define Depth_z_far 100.00 //[0.00001 to 100000.0] Camera z far, must be further than the near value. //===========================================// // Custom // // Settings // //===========================================// #define custom_strength 1.0 //[0.00 to 1.00] Adjust the strength of the effect

Comments

You need to be logged in to post a comment