SweetFX Settings DB
Latest forum threads
4 minutes ago
by Olhag
15 minutes ago
by Olhag
1 hour, 55 minutes ago
by santi
1 hour, 56 minutes ago
by santi

Clandestine

Preset for Clandestine
Created by Darkkingwill
Added Nov. 30, 2015
Updated 2 Dec 07:22 CET
Shader used: SweetFX 2.0
Preset description:
SMAA Lumasharpen Bloom HDR Technicolor DPX Tonemap Vibrance Curves
Download preset Show / Hide settings
#define USE_SMAA_ANTIALIASING 1 #define USE_LUMASHARPEN 1 #define USE_BLOOM 1 #define USE_HDR 1 #define USE_TECHNICOLOR 1 #define USE_DPX 1 #define USE_LIFTGAMMAGAIN 0 #define USE_TONEMAP 1 #define USE_VIBRANCE 1 #define USE_CURVES 1 #define USE_CARTOON 0 #define USE_ADVANCED_CRT 0 #define USE_MONOCHROME 0 #define USE_SEPIA 0 #define USE_VIGNETTE 0 #define USE_DITHER 0 #define USE_BORDER 0 #define USE_SPLITSCREEN 0 /* LumaSharpen settings */ #define sharp_strength .50 // [0.10 to 3.00] Strength of the sharpening #define sharp_clamp 0.070 // [0.000 to 1.000] Limits maximum amount of sharpening a pixel recieves - Default is 0.035 #define pattern 4 // [1|2|3|4] Choose a sample pattern. 1 = Fast, 2 = Normal, 3 = Wider, 4 = Pyramid shaped. #define offset_bias 1.0 // [0.0 to 6.0] Offset bias adjusts the radius of the sampling pattern. #define show_sharpen 0 // [0 or 1] Visualize the strength of the sharpen (multiplied by 4 to see it better) /* Bloom settings */ #define BloomThreshold 30.00 // [0.00 to 50.00] Threshold for what is a bright light (that causes bloom) and what isn't. #define BloomPower 1.150 // [0.000 to 8.000] Strength of the bloom #define BloomWidth 0.0150 // [0.0000 to 1.0000] Width of the bloom /* HDR settings */ #define HDRPower 1.15 // [0.00 to 8.00] Strangely lowering this makes the image brighter #define radius2 0.93 // [0.00 to 8.00] Raising this seems to make the effect stronger and also brighter /* Technicolor settings */ #define TechniAmount 0.11 // [0.00 to 1.00] #define TechniPower 2.8 // [0.00 to 8.00] #define redNegativeAmount 0.92 // [0.00 to 1.00] #define greenNegativeAmount 0.88 // [0.00 to 1.00] #define blueNegativeAmount 0.88 // [0.00 to 1.00] /* Cineon DPX settings */ #define Red 7.0 // [1.0 to 15.0] #define Green 8.0 // [1.0 to 15.0] #define Blue 8.0 // [1.0 to 15.0] #define ColorGamma 2.5 // [0.1 to 2.5] Adjusts the colorfulness of the effect in a manner similar to Vibrance. 1.0 is neutral. #define DPXSaturation 3.0 // [0.0 to 8.0] Adjust saturation of the effect. 1.0 is neutral. #define RedC 0.20 // [0.60 to 0.20] #define GreenC 0.20 // [0.60 to 0.20] #define BlueC 0.20 // [0.60 to 0.20] #define Blend 0.05 // [0.00 to 1.00] How strong the effect should be. /* Lift Gamma Gain settings */ #define RGB_Lift float3(.960,.970,.970) // [0.000 to 2.000] Adjust shadows for Red, Green and Blue. #define RGB_Gamma float3(.960,.970,.970) // [0.000 to 2.000] Adjust midtones for Red, Green and Blue #define RGB_Gain float3(1.000,1.000,1.000) // [0.000 to 2.000] Adjust highlights for Red, Green and Blue /* Tonemap settings */ #define Gamma 1.0 // [0.000 to 2.000] Adjust midtones. 1.000 is neutral. This setting does exactly the same as the one in Lift Gamma Gain, only with less control. #define Exposure 0.00 // [-1.000 to 1.000] Adjust exposure #define Saturation 0.00 // [-1.000 to 1.000] Adjust saturation #define Bleach 0.00 // [0.000 to 1.000] Brightens the shadows and fades the colors #define Defog 0.000 // [0.000 to 1.000] How much of the color tint to remove #define FogColor float3(0.00,0.00,2.55) // [0.00 to 2.55, 0.00 to 2.55, 0.00 to 2.55] What color to remove - default is blue /* Vibrance settings */ #define Vibrance .10 // [-1.00 to 1.00] Intelligently saturates (or desaturates if you use negative values) the pixels depending on their original saturation. /* Curves settings */ #define Curves_contrast 0.25 // [-1.00 to 1.00] The amount of contrast you want #define Curves_formula 7 // [1|2|3|4|5|6|7|8|9|10] The contrast s-curve you want to use. /* Cartoon settings */ #define CartoonPower 10.0 // [0.1 to 10.0] Amount of effect you want. /* Advanced CRT settings */ #define CRTAmount 1.00 // [0.00 to 1.00] Amount of CRT effect you want #define CRTResolution 1.2 // [1.0 to 8.0] Input size coefficent (low values gives the "low-res retro look"). Default is 1.2 #define CRTgamma 2.4 // [0.0 to 4.0] Gamma of simulated CRT (default 2.2) #define CRTmonitorgamma 2.2 // [0.0 to 4.0] Gamma of display monitor (typically 2.2 is correct) #define CRTBrightness 1.0 // [1.0 to 3.0] Used to boost brightness a little. Default is 1.0 #define CRTScanlineIntensity 2.0 // [2.0 to 4.0] Scanlines intensity (use integer values preferably). Default is 2.0 #define CRTScanlineGaussian 1 // [0 or 1] Use the "new nongaussian scanlines bloom effect". Default is on #define CRTCurvature 1 // [[0 or 1] "Barrel effect" enabled (1) or off (0) #define CRTCurvatureRadius 1.5 // [0.0 to 2.0] Curvature Radius (only effective when Curvature is enabled). Default is 1.5 #define CRTCornerSize 0.0010 // [0.0000 to 0.0020] Higher values, more rounded corner. Default is 0.001 #define CRTDistance 2.00 // [0.00 to 4.00] Simulated distance from viewer to monitor. Default is 2.00 #define CRTAngleX 0.00 // [-0.20 to 0.20] Tilt angle in radians (X coordinates) #define CRTAngleY -0.10 // [-0.20 to 0.20] Tilt angle in radians (Y coordinates). (Value of -0.15 gives the 'arcade tilt' look) #define CRTOverScan 1.01 // [1.00 to 1.10] Overscan (e.g. 1.02 for 2% overscan). Default is 1.01 #define CRTOversample 0 // [0 or 1] Enable 3x oversampling of the beam profile (warning : performance hit) /* Monochrome settings */ #define Monochrome_conversion_values float3(0.18,0.41,0.41) // [0.00 to 1.00] Percentage of RGB to include (should sum up to 1.00) /* Sepia settings */ #define ColorTone float3(1.40,1.10,0.90) // [0.00 to 2.55, 0.00 to 2.55, 0.00 to 2.55] What color to tint the image #define GreyPower 0.11 // [0.00 to 1.00] How much desaturate the image before tinting it #define SepiaPower 0.58 // [0.00 to 1.00] How much to tint the image /* Vignette settings */ #define VignetteRatio 1.00 // [0.15 to 6.00] Sets a width to height ratio. 1.00 (1/1) is perfectly round, while 1.60 (16/10) is 60 % wider than it's high. #define VignetteRadius 1.00 // [-1.00 to 3.00] lower values = stronger radial effect from center #define VignetteAmount -1.00 // [-2.00 to 1.00] Strength of black. -2.00 = Max Black, 1.00 = Max White. #define VignetteSlope 8 // [2 to 16] How far away from the center the change should start to really grow strong (odd numbers cause a larger fps drop than even numbers) #define VignetteCenter float2(0.500,0.500) // [0.000 to 1.000, 0.000 to 1.000] Center of effect for VignetteType 1. 2 and 3 do not obey this setting. /* Dither settings */ #define dither_method 1 // [1 or 2] 1 = Ordered dithering (very good and very fast), 2 = Random dithering (different but slightly slower dithering) /* Border settings */ /* Splitscreen settings */ #define splitscreen_mode 6 // [1|2|3|4|5|6] 1 = Vertical 50/50 split, 2 = Vertical 25/50/25 split, 3 = Vertical 50/50 angled split, 4 = Horizontal 50/50 split, 5 = Horizontal 25/50/25 split, 6 = Curvy vertical 50/50 split /*-----------------------------------------------------------. / SMAA Anti-aliasing settings / '-----------------------------------------------------------*/ #define SMAA_THRESHOLD 0.05 //[0.05 to 0.20] Edge detection threshold. If SMAA misses some edges try lowering this slightly. I prefer between 0.08 and 0.12. #define SMAA_MAX_SEARCH_STEPS 88 //[0 to 98] Determines the radius SMAA will search for aliased edges #define SMAA_MAX_SEARCH_STEPS_DIAG 16 //[0 to 16] Determines the radius SMAA will search for diagonal aliased edges #define SMAA_CORNER_ROUNDING 10 //[0 to 100] Determines the percent of antialiasing to apply to corners. 0 seems to affect fine text the least so it's the default. // -- Advanced SMAA settings -- #define COLOR_EDGE_DETECTION 1 //[0 or 1] 1 Enables color edge detection (slower but slightly more acurate) - 0 uses luma edge detection (faster) #define SMAA_DIRECTX9_LINEAR_BLEND 0 //[0 or 1] Using DX9 HARDWARE? (software version doesn't matter) if so this needs to be 1 - If not, leave it at 0. //Enable this only if you use a Geforce 7xxx series or older card, or a Radeon X1xxx series or older card.

Comments

You need to be logged in to post a comment