SweetFX Settings DB
Latest forum threads
21 minutes ago
22 minutes ago
2 hours, 3 minutes ago
2 hours, 4 minutes ago
COD 5 white/lights are too shiny
Posted 9 years, 1 month ago
Hi there! I´ve got problems with the shining of white textures, especially on snow maps, all those white surfaces are dazzling. Can someone kindly check my settings to tell me what settings I have to change? #define USE_SMAA_ANTIALIASING 1 //[0 or 1] SMAA Anti-aliasing : Smoothens jagged lines using the SMAA technique. #define USE_FXAA_ANTIALIASING 0 //[0 or 1] FXAA Anti-aliasing : Smoothens jagged lines using the FXAA technique. WIP - Currently only works in DX9 and you need to use the FXAA injector dlls. #define USE_CARTOON 0 //[0 or 1] Cartoon : "Toon"s the image. (Interferes with SMAA, CRT, Bloom, HDR and Lumasharpen) #define USE_ADVANCED_CRT 0 //[0 or 1] Advanced CRT : Simulates an old CRT TV display. (Interferes with SMAA, Cartoon, Bloom, HDR and Lumasharpen, and it has a very high performance cost) #define USE_BLOOM 1 //[0 or 1] Bloom : Makes bright lights bleed their light into their surroundings (relatively high performance cost) #define USE_HDR 1 //[0 or 1] HDR : Not actual HDR - It just tries to mimic an HDR look (relatively high performance cost) #define USE_LUMASHARPEN 1 //[0 or 1] LumaSharpen : Also sharpens the antialiased edges which makes them less smooth - I'm working on fixing that. #define USE_TECHNICOLOR 0 //[0 or 1] TECHNICOLOR : Attempts to mimic the look of an old movie using the Technicolor three-strip color process (Techicolor Process 4) #define USE_DPX 0 //[0 or 1] Cineon DPX : Should make the image look like it's been converted to DXP Cineon - basically it's another movie-like look similar to technicolor. #define USE_MONOCHROME 0 //[0 or 1] Monochrome : Monochrome makes the colors disappear. #define USE_LIFTGAMMAGAIN 1 //[0 or 1] Lift Gamma Gain : Adjust brightness and color of shadows, midtones and highlights (avoids clipping) #define USE_TONEMAP 1 //[0 or 1] Tonemap : Adjust gamma, exposure, saturation, bleach and defog. (may cause clipping) #define USE_VIBRANCE 0 //[0 or 1] Vibrance : Intelligently saturates (or desaturates if you use negative values) the pixels depending on their original saturation. #define USE_CURVES 0 //[0 or 1] Curves : Contrast adjustments using S-curves. #define USE_SEPIA 1 //[0 or 1] Sepia : Sepia tones the image. #define USE_VIGNETTE 0 //[0 or 1] Vignette : Darkens the edges of the image to make it look more like it was shot with a camera lens. May cause banding artifacts. #define USE_DITHER 1 //[0 or 1] Dither : Applies dithering to simulate more colors than your monitor can display. This lessens banding artifacts (mostly caused by Vignette) #define USE_BORDER 0 //[0 or 1] Border : Makes the screenedge black as a workaround for the bright edge that forcing some AA modes sometimes causes. #define USE_SPLITSCREEN 0 //[0 or 1] Splitscreen : Enables the before-and-after splitscreen comparison mode. /*-----------------------------------------------------------. / SMAA Anti-aliasing settings / '-----------------------------------------------------------*/ #define SMAA_THRESHOLD 0.10 //[0.05 to 0.20] Edge detection threshold. If SMAA misses some edges try lowering this slightly. I prefer between 0.08 and 0.12. #define SMAA_MAX_SEARCH_STEPS 32 //[0 to 98] Determines the radius SMAA will search for aliased edges #define SMAA_MAX_SEARCH_STEPS_DIAG 16 //[0 to 16] Determines the radius SMAA will search for diagonal aliased edges #define SMAA_CORNER_ROUNDING 0 //[0 to 100] Determines the percent of antialiasing to apply to corners. 0 seems to affect fine text the least so it's the default. // -- Advanced SMAA settings -- #define COLOR_EDGE_DETECTION 1 //[0 or 1] 1 Enables color edge detection (slower but slightly more acurate) - 0 uses luma edge detection (faster) #define SMAA_DIRECTX9_LINEAR_BLEND 0 //[0 or 1] Using DX9 HARDWARE? (software version doesn't matter) if so this needs to be 1 - If not, leave it at 0. //Enable this only if you use a Geforce 7xxx series or older card, or a Radeon X1xxx series or older card. /*-----------------------------------------------------------. / FXAA Anti-aliasing settings / '-----------------------------------------------------------*/ #define FXAA_QUALITY__PRESET 9 //[1 to 9] Choose the quality preset. 9 is the highest quality. #define fxaa_Subpix 0.400 //[0.000 to 1.000] Choose the amount of sub-pixel aliasing removal. #define fxaa_EdgeThreshold 0.250 //[0.000 to 1.000] Edge detection threshold. The minimum amount of local contrast required to apply algorithm. #define fxaa_EdgeThresholdMin 0.060 //[0.000 to 1.000] Darkness threshold. Trims the algorithm from processing darks. /*-----------------------------------------------------------. / Cartoon settings / '-----------------------------------------------------------*/ #define CartoonPower 1.0 //[0.1 to 10.0] Amount of effect you want. /*-----------------------------------------------------------. / Advanced CRT settings / '----------------------------------------------------------*/ #define CRTAmount 1.00 //[0.00 to 1.00] Amount of CRT effect you want #define CRTResolution 1.2 //[1.0 to 8.O] Input size coefficent (low values gives the "low-res retro look"). Default is 1.2 #define CRTgamma 2.4 //[0.0 to 4.0] Gamma of simulated CRT (default 2.4) #define CRTmonitorgamma 2.2 //[0.0 to 4.0] Gamma of display monitor (typically 2.2 is correct) #define CRTBrightness 1.0 //[1.0 to 3.0] Used to boost brightness a little. Default is 1.0 #define CRTScanlineIntensity 2.0 //[2.0 to 4.0] Scanlines intensity (use integer values preferably). Default is 2.0 #define CRTScanlineGaussian 1 //[0 or 1] Use the "new nongaussian scanlines bloom effect". Default is on #define CRTCurvature 1 //[[0 or 1] "Barrel effect" enabled (1) or off (0) #define CRTCurvatureRadius 1.5 //[0.0 to 2.0] Curvature Radius (only effective when Curvature is enabled). Default is 1.5 #define CRTCornerSize 0.0010 //[0.0000 to 0.0020] Higher values, more rounded corner. Default is 0.001 #define CRTDistance 2.00 //[0.00 to 4.00] Simulated distance from viewer to monitor. Default is 2.00 #define CRTAngleX 0.00 //[-0.20 to 0.20] Tilt angle in radians (X coordinates) #define CRTAngleY -0.10 //[-0.20 to 0.20] Tilt angle in radians (Y coordinates). (Value of -0.15 gives the 'arcade tilt' look) #define CRTOverScan 1.01 //[1.00 to 1.10] Overscan (e.g. 1.02 for 2% overscan). Default is 1.01 #define CRTOversample 0 //[0 or 1] Enable 3x oversampling of the beam profile (warning : performance hit) /*-----------------------------------------------------------. / Bloom settings / '-----------------------------------------------------------*/ #define BloomThreshold 21.25 //[0.00 to 50.00] Threshold for what is a bright light (that causes bloom) and what isn't. #define BloomPower 1.111 //[0.000 to 8.000] Strength of the bloom #define BloomWidth 1.0000 //[0.0000 to 1.0000] Width of the bloom /*-----------------------------------------------------------. / HDR settings / '-----------------------------------------------------------*/ #define HDRPower 1.40 //[0.00 to 8.00] Strangely lowering this makes the image brighter #define radius2 1.30 //[0.00 to 8.00] Raising this seems to make the effect stronger and also brighter /*-----------------------------------------------------------. / LumaSharpen settings / '-----------------------------------------------------------*/ // -- Sharpening -- #define sharp_strength 0.15 //[0.10 to 3.00] Strength of the sharpening #define sharp_clamp 0.020 //[0.000 to 1.000] Limits maximum amount of sharpening a pixel recieves - Default is 0.035 // -- Advanced sharpening settings -- #define pattern 4 //[1|2|3|4] Choose a sample pattern. 1 = Fast, 2 = Normal, 3 = Wider, 4 = Pyramid shaped. #define offset_bias 1.0 //[0.0 to 6.0] Offset bias adjusts the radius of the sampling pattern. //I designed the pattern for offset_bias 1.0, but feel free to experiment. // -- Debug sharpening settings -- #define show_sharpen 0 //[0 or 1] Visualize the strength of the sharpen (multiplied by 4 to see it better) /*-----------------------------------------------------------. / TECHNICOLOR settings / '-----------------------------------------------------------*/ #define TechniAmount 0.4 //[0.00 to 1.00] #define TechniPower 4.0 //[0.00 to 8.00] #define redNegativeAmount 0.88 //[0.00 to 1.00] #define greenNegativeAmount 0.88 //[0.00 to 1.00] #define blueNegativeAmount 0.88 //[0.00 to 1.00] /*-----------------------------------------------------------. / Cineon DPX settings / '-----------------------------------------------------------*/ #define Red 8.0 //[1.0 to 15.0] #define Green 8.0 //[1.0 to 15.0] #define Blue 8.0 //[1.0 to 15.0] #define ColorGamma 2.5 //[0.1 to 2.5] Adjusts the colorfulness of the effect in a manner similar to Vibrance. 1.0 is neutral. #define DPXSaturation 3.0 //[0.0 to 8.0] Adjust saturation of the effect. 1.0 is neutral. #define RedC 0.36 //[0.60 to 0.20] #define GreenC 0.36 //[0.60 to 0.20] #define BlueC 0.34 //[0.60 to 0.20] #define Blend 0.2 //[0.00 to 1.00] How strong the effect should be. /*-----------------------------------------------------------. / Monochrome settings / '-----------------------------------------------------------*/ #define Monochrome_conversion_values float3(0.18,0.41,0.41) //[0.00 to 1.00] Percentage of RGB to include (should sum up to 1.00) /*-----------------------------------------------------------. / Lift Gamma Gain settings / '-----------------------------------------------------------*/ #define RGB_Lift float3(1.005, 1.000, 1.000) //[0.000 to 2.000] Adjust shadows for Red, Green and Blue #define RGB_Gamma float3(1.000, 1.005, 1.000) //[0.000 to 2.000] Adjust midtones for Red, Green and Blue #define RGB_Gain float3(1.000, 1.000, 1.005) //[0.000 to 2.000] Adjust highlights for Red, Green and Blue /*-----------------------------------------------------------. / Tonemap settings / '-----------------------------------------------------------*/ #define Gamma 1.2 //[0.000 to 2.000] Adjust midtones #define Exposure -0.08 //[-1.000 to 1.000] Adjust exposure #define Saturation 0.389 //[-1.000 to 1.000] Adjust saturation #define Bleach 0.00 //[0.000 to 1.000] Brightens the shadows and fades the colors #define Defog 0.000 //[0.000 to 1.000] How much of the color tint to remove #define FogColor float3(0.10, 1.00, 2.55) //[0.00 to 2.55, 0.00 to 2.55, 0.00 to 2.55] What color to remove - default is blue /*-----------------------------------------------------------. / Vibrance settings / '-----------------------------------------------------------*/ #define Vibrance 0.35 //[-1.00 to 1.00] Intelligently saturates (or desaturates if you use negative values) the pixels depending on their original saturation. /*-----------------------------------------------------------. / Curves settings / '-----------------------------------------------------------*/ #define Curves_mode 0 //[0|1|2] Choose what to apply contrast to. 0 = Luma, 1 = Chroma, 2 = both Luma and Chroma. Default is 0 (Luma) #define Curves_contrast 0.15 //[-1.00 to 1.00] The amount of contrast you want // -- Advanced curve settings -- #define Curves_formula 2 //[1|2|3|4|5|6|7|8|9] The contrast s-curve you want to use. //1 = Sine, 2 = Abs split, 3 = Smoothstep, 4 = Exp formula, 5 = Simplified Catmull-Rom (0,0,1,1), 6 = Perlins Smootherstep //7 = Abs add, 8 = Techicolor Cinestyle, 9 = Parabola. //Note that Technicolor Cinestyle is practically identical to Sine, but runs slower. In fact I think the difference might only be due to rounding errors. //I prefer 2 myself, but 3 is a nice alternative with a little more effect (but harsher on the highlight and shadows) and it's the fastest formula. /*-----------------------------------------------------------. / Sepia settings / '-----------------------------------------------------------*/ #define ColorTone float3(0.70, 0.80, 0.90) //[0.00 to 2.55, 0.00 to 2.55, 0.00 to 2.55] What color to tint the image #define GreyPower 0.00 //[0.00 to 1.00] How much desaturate the image before tinting it #define SepiaPower 0.19 //[0.00 to 1.00] How much to tint the image /*-----------------------------------------------------------. / Vignette settings / '-----------------------------------------------------------*/ #define VignetteRatio 1.00 //[0.15 to 6.00] Sets a width to height ratio. 1.00 (1/1) is perfectly round, while 1.60 (16/10) is 60 % wider than it's high. #define VignetteRadius 1.00 //[-1.00 to 3.00] lower values = stronger radial effect from center #define VignetteAmount -2.00 //[-2.00 to 1.00] Strength of black. -2.00 = Max Black, 1.00 = Max White. #define VignetteSlope 8 //[1 to 16] How far away from the center the change should start to really grow strong (odd numbers cause a larger fps drop than even numbers) #define VignetteCenter float2(0.500, 0.500) //[0.000 to 1.000, 0.000 to 1.000] Center of effect. /*-----------------------------------------------------------. / Dither settings / '-----------------------------------------------------------*/ #define dither_method 2 //[1 or 2] 1 = Ordering dithering (good and very fast), 2 = Random dithering (even better dithering but not as fast) //Note that the patterns used by Dither, makes an image harder to compress. //This can make your screenshots and video recordings take up more space.
Posted 9 years, 1 month ago
try to change these lines: BLOOM: #define BloomThreshold 21.25 and HDR: #define radius2 1.30 bloom some higher value for example 27 and hdr lower value 0.90 if u change the hdr value it can happen u need to lower #define HDRPower 1.40 to 1.10 or 1.04 or something like that..... if it´s still dazzling try to change HDR: #define radius2 in small steps (0.88 or 0.89..) and i never used SEPIA befor so just turn it off or on and look what happen :)
Posted 9 years, 1 month ago
thanks for your reply, I'm gonna try it!
Posted 9 years, 1 month ago
Worked perfectly fine, lowering the HDR radius2 to 0,94 and bloom threshold to 27
Posted 9 years, 1 month ago
If you want to use sepia,search for colors you want to use. That 3 values is codes for sepia colors Dont overvalue in #define SepiaPower especially if u use white color because will make screen over brightness
Posted 2 months, 1 week ago
Unlock the potential of your website with 백링크. These connections act as digital endorsements, signaling to search engines that your content is trustworthy and authoritative.https://backlinkhigh.com
Posted 2 months, 1 week ago
Elevate your well-being at 울산오피, a wellness haven in Ulsan, known for its holistic approach, skilled therapists, and serene ambiance.https://www.울산오피.org
Posted 2 months ago
Most of the time I don’t make comments on websites, but I'd like to say that this article really forced me to do so. Really nice post! https://www.merinotex.com/about-us/
Posted 1 month, 4 weeks ago
I highly recommend 용인휴게텔 for an escape from daily life. The ambiance, skilled therapists, and diverse massage offerings make it exceptional.https://www.hyutel.com/용인휴게텔
Posted 1 month, 3 weeks ago
I'm a loyal supporter of 무료스포츠중계. It's the future of sports streaming.https://kktv04.com
Posted 1 month, 2 weeks ago
I love the blog. Great post. It is very true, people must learn how to learn before they can learn. lol i know it sounds funny but its very true. . . https://www.facebook.com/
Posted 1 month, 2 weeks ago
It turns out that even the hottest port has a few places where you can get off the beaten path. Here are some recommendations that will make you feel like you're in the know https://www.facebook.com/
Posted 1 month, 2 weeks ago
Should there be another persuasive post you can share next time, I’ll be surely waiting for it. https://themusicuniverse.com/5-steps-start-your-music-career/
Posted 1 month, 2 weeks ago
Hello Forum Members, I hope this message finds you in good spirits. Today, I'd like to shed light on the positive aspects of offshore development teams, focusing on the valuable insights provided by GloriumTech in their article titled "How to Work with an Agile Offshore Software Development Team" (https://gloriumtech.com/how-to-work-with-an-agile-offshore-software-development-team/). Offshore development teams have become an integral part of the global software development landscape, offering numerous advantages such as cost-effectiveness, access to diverse skill sets, and the ability to operate around the clock. GloriumTech's article provides an informative guide on how organizations can harness the full potential of offshore development, specifically within the framework of Agile methodologies. The article emphasizes the importance of clear communication, collaborative tools, and the establishment of trust between onshore and offshore teams. GloriumTech's approach focuses on making offshore collaboration seamless and efficient, ensuring that the distance between teams doesn't hinder the progress or quality of the development process. What sets GloriumTech apart is their commitment to fostering a positive working relationship and creating a bridge between different geographical locations. They advocate for embracing modern technologies and adapting to a dynamic workflow to maximize the benefits of offshore development. In a rapidly evolving industry, it's crucial to explore and understand the positive aspects of offshore development teams. GloriumTech's insights provide practical advice and actionable strategies for organizations looking to leverage the strengths of offshore collaboration effectively. I encourage everyone to read the article and share your thoughts on how offshore development teams can contribute to successful software development projects. Let's engage in a constructive discussion on how to optimize the advantages highlighted by GloriumTech.
Posted 1 month, 2 weeks ago
I read this article. I think You put a lot of effort to create this article. I appreciate your work. https://topbeautybrides.net/
Posted 1 month, 1 week ago
his is my first time i visit here. I found so many entertaining stuff in your blog, especially its discussion. From the tons of comments on your articles, I guess I am not the only one having all the leisure here! Keep up the excellent work. https://www.youtube.com/watch?v=SDY6p-ZLSY8
Posted 1 month, 1 week ago
I feel a lot more people need to read this, very good info! https://hdpbet.fans/
Posted 1 month, 1 week ago
I would like to thank you for the efforts you have made in writing this article. I am hoping the same best work from you in the future as well. In fact your creative writing abilities has inspired me to start my own BlogEngine blog now. Really the blogging is spreading its wings rapidly. Your write up is a fine example of it. https://topbeautybrides.net/
Posted 3 weeks, 6 days ago
Your post was very nicely written. I’ll be back in the future for sure! https://gratis-4398697.webador.de/
Posted 3 weeks, 3 days ago
Daisy Limousine provides the best black car service in the tri-state area. We can provide limo service or airport service in New Jersey, New York, Rhode Island, Massachusetts, Pennsylvania, and Connecticut. Our on-time ground transportation service will drive you pretty much from A to B anywhere in the North East of America. Give us a call or book a ride online at your convenience https://pknewz47.com/
Posted 3 weeks, 1 day ago
Easily, the article is actually the best topic on this registry related issue. I fit in with your conclusions and will eagerly look forward to your next updates. Just saying thanks will not just be sufficient, for the fantasti c lucidity in your writing. I will instantly grab your rss feed to stay informed of any updates. https://pknewz47.com/pakistan-jeffrey-dahmer/
Posted 3 weeks ago
mmm.. good to be here in your article or post, whatever, I think I should also work hard for my own website like I see some good and updated working in your site. https://pknewz47.com/allintitle-business-loan-for-startup/
Posted 2 weeks, 6 days ago
Internet search engine optimization experts apply the modern analytics service, which has a positive affect a website. SEO companies are facing great competition in the SEO field. However, they introduce guaranteed SEO services to manage with the competition. <a href="https://pknewz47.com/11520-education/">11520 education</a>
Posted 1 week, 6 days ago
Yes, great US Military force. Also, in his post you have given a chance to listen about US Military. I really appreciate your work. Thanks for sharing it. <a href="https://mosforela.com/">модна фотографія в парижі</a>
Posted 1 week, 4 days ago
Thanks for the blog loaded with so many information. Stopping by your blog helped me to get what I was looking for. <a href="https://etaportal.net/board ">keta korea</a>
Posted 1 week, 3 days ago
Pretty good post. I just stumbled upon your blog and wanted to say that I have really enjoyed reading your blog posts. Any way I'll be subscribing to your feed and I hope you post again soon. Big thanks for the useful info <a href="https://declic-video-fx.com/">itcbet</a>
Posted 5 days, 15 hours ago
his is my first time i visit here. I found so many entertaining stuff in your blog, especially its discussion. From the tons of comments on your articles, I guess I am not the only one having all the leisure here! Keep up the excellent work. https://agilityportal.io/blog/communication-tools
New post

Please log in to post an answer