Preset description:

/*-----------------------------------------------------------. / Description / '------------------------------------------------------------/ Game: pcsx2 and pc multigames SweetFX version: 1.5 Author: Esilvaro Description: These are the settings i use for all games (pc and pcsx2). /*-----------------------------------------------------------. / Choose effects / '-----------------------------------------------------------*/ // Set to 1 for ON or 0 for OFF #define USE_SMAA_ANTIALIASING 1 //[0 or 1] SMAA Anti-aliasing : Smoothens jagged lines using the SMAA technique. #define USE_FXAA_ANTIALIASING 0 //[0 or 1] FXAA Anti-aliasing : Smoothens jagged lines using the FXAA technique #define USE_CARTOON 0 //[0 or 1] Cartoon : "Toon"s the image.(Interferes with SMAA, CRT, Bloom, HDR and Lumasharpen) #define USE_TVLEVELS 0 //[0 or 1] TVLevels : Adjusts the brightness/darkness of the scene with a straight line instead of a curve. #define USE_ADVANCED_CRT 0 //[0 or 1] Advanced CRT : Simulates an old CRT TV display. Set gaussian blur along with it to get a halation effect #define USE_BLOOM 1 //[0 or 1] Bloom : Makes bright lights bleed their light into their surroundings (relatively high performance cost) #define USE_HDR 1 //[0 or 1] HDR : Not actual HDR - It just tries to mimic an HDR look (relatively high performance cost) #define USE_LUMASHARPEN 1 //[0 or 1] LumaSharpen : Also sharpens the antialiased edges which makes them less smooth - I'm working on fixing that. #define USE_GAUSSIAN 0 //[0 or 1] Gaussian Blur : can be used to... blur, but also bloom/hazy/glowy look, also unsharp masking #define USE_FILMGRAIN 0 //[0 or 1] Filmgrain effect #define USE_TECHNICOLOR 0 //[0 or 1] TECHNICOLOR : Attempts to mimic the look of an old movie using the Technicolor three-strip color process (Techicolor Process 4) #define USE_DPX 0 //[0 or 1] Cineon DPX : Should make the image look like it's been converted to DXP Cineon - basically it's another movie-like look similar to technicolor. #define USE_MONOCHROME 0 //[0 or 1] Monochrome : Monochrome makes the colors disappear. #define USE_LIFTGAMMAGAIN 1 //[0 or 1] Lift Gamma Gain : Adjust brightness and color of shadows, midtones and highlights (avoids clipping) #define USE_TONEMAP 1 //[0 or 1] Tonemap : Adjust gamma, exposure, saturation, bleach and defog. (may cause clipping) #define USE_VIBRANCE 1 //[0 or 1] Vibrance : Intelligently saturates (or desaturates if you use negative values) the pixels depending on their original saturation. #define USE_CURVES 1 //[0 or 1] Curves : Contrast adjustments using S-curves. #define USE_SEPIA 0 //[0 or 1] Sepia : Sepia tones the image. #define USE_VIGNETTE 0 //[0 or 1] Vignette : Darkens the edges of the image to make it look more like it was shot with a camera lens. May cause banding artifacts. #define USE_DITHER 1 //[0 or 1] Dither : Applies dithering to simulate more colors than your monitor can display. This lessens banding artifacts (mostly caused by Vignette) #define USE_BORDER 0 //[0 or 1] Border : Makes the screenedge black as a workaround for the bright edge that forcing some AA modes sometimes causes. #define USE_COLORBLIND 0 //[0 or 1] ColorBlind Correction: adjust the mode in the following section. #define USE_SPLITSCREEN 0 //[0 or 1] Splitscreen : Enables the before-and-after splitscreen comparison mode. /*-----------------------------------------------------------. / SMAA Anti-aliasing settings / '-----------------------------------------------------------*/ #define SMAA_THRESHOLD 0.20 //[0.05 to 0.20] Edge detection threshold. If SMAA misses some edges try lowering this slightly. I prefer between 0.08 and 0.12. #define SMAA_MAX_SEARCH_STEPS 98 //[0 to 98] Determines the radius SMAA will search for aliased edges #define SMAA_MAX_SEARCH_STEPS_DIAG 16 //[0 to 16] Determines the radius SMAA will search for diagonal aliased edges #define SMAA_CORNER_ROUNDING 100 //[0 to 100] Determines the percent of antialiasing to apply to corners. 0 seems to affect fine text the least so it's the default. // -- Advanced SMAA settings -- #define COLOR_EDGE_DETECTION 1 //[0 or 1] 1 Enables color edge detection (slower but slightly more acurate) - 0 uses luma edge detection (faster) #define SMAA_DIRECTX9_LINEAR_BLEND 0 //[0 or 1] Using DX9 HARDWARE? (software version doesn't matter) if so this needs to be 1 - If not, leave it at 0. //Enable this only if you use a Geforce 7xxx series or older card, or a Radeon X1xxx series or older card. /*-----------------------------------------------------------. / FXAA Anti-aliasing settings / '-----------------------------------------------------------*/ #define FXAA_QUALITY__PRESET 39 //[1 to 39] Choose the quality preset. 39 is the highest quality. #define fxaa_Subpix 0.200 //[0.000 to 1.000] Choose the amount of sub-pixel aliasing removal. #define fxaa_EdgeThreshold 0.250 //[0.000 to 1.000] Edge detection threshold. The minimum amount of local contrast required to apply algorithm. #define fxaa_EdgeThresholdMin 0.060 //[0.000 to 1.000] Darkness threshold. Trims the algorithm from processing darks. /*-----------------------------------------------------------. / Cartoon settings / '-----------------------------------------------------------*/ #define CartoonPower 0.2 //[0.1 to 10.0] Amount of effect you want. /*-----------------------------------------------------------. / TVLevels settings / '-----------------------------------------------------------*/ #define DARK_LEVEL 4.0 //[0 to 255] Darkness strength. Higher values mean darker shadows, 0 means no change. Default is 16.0 #define BRIGHT_LEVEL 4.0 //[0 to 255] Brightness strength. Higher values mean brighter lights, 0 means no change. Default is 20.0 /*-----------------------------------------------------------. / Advanced CRT settings / '----------------------------------------------------------*/ #define CRTAmount 1.00 //[0.00 to 1.00] Amount of CRT effect you want #define CRTResolutionX 512 //[1 to 2048] Original input width of the game (ie. 320) #define CRTResolutionY 304 //[1 to 2048] Original input height of the game (ie. 240) #define CRTgamma 2.4 //[0.0 to 4.0] Gamma of simulated CRT (default 2.4) #define CRTmonitorgamma 2.2 //[0.0 to 4.0] Gamma of display monitor (typically 2.2 is correct) #define CRTBrightness 0.9 //[1.0 to 3.0] Used to boost brightness a little. Default is 1.0 #define CRTScanlineIntensity 2.0 //[2.0 to 4.0] Scanlines intensity (use integer values preferably). Default is 2.0 #define CRTScanlineGaussian 1 //[0 or 1] Use the "new nongaussian scanlines bloom effect". Default is on #define CRTCurvature 1 //[[0 or 1] "Barrel effect" enabled (1) or off (0) #define CRTCurvatureRadius 1.5 //[0.0 to 2.0] Curvature Radius (only effective when Curvature is enabled). Default is 1.5 #define CRTCornerSize 0.0100 //[0.0000 to 0.0020] Higher values, more rounded corner. Default is 0.001 #define CRTDistance 2.00 //[0.00 to 4.00] Simulated distance from viewer to monitor. Default is 2.00 #define CRTAngleX 0.00 //[-0.20 to 0.20] Tilt angle in radians (X coordinates) #define CRTAngleY -0.15 //[-0.20 to 0.20] Tilt angle in radians (Y coordinates). (Value of -0.15 gives the 'arcade tilt' look) #define CRTOverScan 1.01 //[1.00 to 1.10] Overscan (e.g. 1.02 for 2% overscan). Default is 1.01 #define CRTOversample 0 //[0 or 1] Enable 3x oversampling of the beam profile (warning : performance hit) /*-----------------------------------------------------------. / Bloom settings / '-----------------------------------------------------------*/ #define BloomThreshold 23 //[0.00 to 50.00] Threshold for what is a bright light (that causes bloom) and what isn't. #define BloomPower 1.75 //[0.000 to 8.000] Strength of the bloom #define BloomWidth 0.0350 //[0.0000 to 1.0000] Width of the bloom /*-----------------------------------------------------------. / HDR settings / '-----------------------------------------------------------*/ #define HDRPower 0.88 //[0.00 to 8.00] Strangely lowering this makes the image brighter #define radius2 0.80 //[0.00 to 8.00] Raising this seems to make the effect stronger and also brighter /*-----------------------------------------------------------. / LumaSharpen settings / '-----------------------------------------------------------*/ // -- Sharpening -- #define sharp_strength 2.00 //[0.10 to 3.00] Strength of the sharpening #define sharp_clamp 0.04 //[0.000 to 1.000] Limits maximum amount of sharpening a pixel recieves - Default is 0.035 // -- Advanced sharpening settings -- #define pattern 4 //[1|2|3|4] Choose a sample pattern. 1 = Fast, 2 = Normal, 3 = Wider, 4 = Pyramid shaped. #define offset_bias 0.5 //[0.0 to 6.0] Offset bias adjusts the radius of the sampling pattern. //I designed the pattern for offset_bias 1.0, but feel free to experiment. // -- Debug sharpening settings -- #define show_sharpen 0 //[0 or 1] Visualize the strength of the sharpen (multiplied by 4 to see it better) /*-----------------------------------------------------------. / Gaussian Blur settings / '-----------------------------------------------------------*/ #define GaussEffect 1 //[0|1|2|3] 0 = Blur, 1 = Unsharpmask (expensive), 2 = Bloom, 3 = Sketchy. Default is 2 #define GaussQuality 3 //[0|1|2|3] Warning: 2 and 3 are expensive. Default is 1 #define GaussSigma 1 //[1 to 4] The higher the wider blur/bloom is (only effective when Bloom selected) #define GaussBloomWarmth 2 //[0|1|2] "Temperature" of the bloom - 0 = neutral, 1 = warm, 2 = hazy/foggy #define GaussThreshold 0.50 //[0.00 to 1.00] [DX10/11 only] Threshold for what is a bright light (that causes bloom) and what isn't. #define GaussExposure 43.0 //[0.00 to 100.00] [DX10/11 only] Exposure of the effect (the lower the brighter) #define GaussStrength 0.045 //[0.00 to 1.00] Amount of effect blended into the final image #define GaussStrengthc 0.010 //[0.00 to 1.00] Amount of effect blended into the final image /*-----------------------------------------------------------. / Film grain settings / '-----------------------------------------------------------*/ #define FilmGrainIntensity 0.46 //[0.00 to 1.00] Intensity of grain. Default is 0.46 #define FilmGrainExposure 40 //[0 to 100] Grain Exposure. Default is 40 (Lower -> darker noise) #define FilmGrainSize 2 //[0 to 10] Size of the grain. Default is 2 (Higher -> thinner noise) /*-----------------------------------------------------------. / TECHNICOLOR settings / '-----------------------------------------------------------*/ #define TechniAmount 0.4 //[0.00 to 1.00] #define TechniPower 4.0 //[0.00 to 8.00] #define redNegativeAmount 0.88 //[0.00 to 1.00] #define greenNegativeAmount 0.88 //[0.00 to 1.00] #define blueNegativeAmount 0.88 //[0.00 to 1.00] /*-----------------------------------------------------------. / Cineon DPX settings / '-----------------------------------------------------------*/ #define Red 15.0 //[1.0 to 15.0] #define Green 15.0 //[1.0 to 15.0] #define Blue 15.0 //[1.0 to 15.0] #define ColorGamma 2.5 //[0.1 to 2.5] Adjusts the colorfulness of the effect in a manner similar to Vibrance. 1.0 is neutral. #define DPXSaturation 1.01 //[0.0 to 8.0] Adjust saturation of the effect. 1.0 is neutral. #define RedC 0.21 //[0.60 to 0.20] #define GreenC 0.21 //[0.60 to 0.20] #define BlueC 0.20 //[0.60 to 0.20] #define Blend 0.04 //[0.00 to 1.00] How strong the effect should be. /*-----------------------------------------------------------. / Monochrome settings / '-----------------------------------------------------------*/ #define Monochrome_conversion_values float3(0.18,0.41,0.41) //[0.00 to 1.00] Percentage of RGB to include (should sum up to 1.00) /*-----------------------------------------------------------. / Lift Gamma Gain settings / '-----------------------------------------------------------*/ #define RGB_Lift float3(1.050, 1.050, 1.050) //[0.000 to 2.000] Adjust shadows for Red, Green and Blue #define RGB_Gamma float3(1.000, 1.000, 1.000) //[0.000 to 2.000] Adjust midtones for Red, Green and Blue #define RGB_Gain float3(0.950, 0.950, 0.950) //[0.000 to 2.000] Adjust highlights for Red, Green and Blue /*-----------------------------------------------------------. / Tonemap settings / '-----------------------------------------------------------*/ #define Gamma 1.20 //[0.000 to 2.000] Adjust midtones #define Exposure 0.00 //[-1.000 to 1.000] Adjust exposure #define Saturation 0.00 //[-1.000 to 1.000] Adjust saturation #define Bleach 0.10 //[0.000 to 1.000] Brightens the shadows and fades the colors #define Defog 0.000 //[0.000 to 1.000] How much of the color tint to remove #define FogColor float3(0.00, 0.00, 2.55) //[0.00 to 2.55, 0.00 to 2.55, 0.00 to 2.55] What color to remove - default is blue /*-----------------------------------------------------------. / Vibrance settings / '-----------------------------------------------------------*/ #define Vibrance 0.30 //[-1.00 to 1.00] Intelligently saturates (or desaturates if you use negative values) the pixels depending on their original saturation. /*-----------------------------------------------------------. / Curves settings / '-----------------------------------------------------------*/ #define Curves_mode 1 //[0|1|2] Choose what to apply contrast to. 0 = Luma, 1 = Chroma, 2 = both Luma and Chroma. Default is 0 (Luma) #define Curves_contrast 0.20 //[-1.00 to 1.00] The amount of contrast you want // -- Advanced curve settings -- #define Curves_formula 3 //[1|2|3|4|5|6|7|8|9] The contrast s-curve you want to use. //1 = Sine, 2 = Abs split, 3 = Smoothstep, 4 = Exp formula, 5 = Simplified Catmull-Rom (0,0,1,1), 6 = Perlins Smootherstep //7 = Abs add, 8 = Techicolor Cinestyle, 9 = Parabola. //Note that Technicolor Cinestyle is practically identical to Sine, but runs slower. In fact I think the difference might only be due to rounding errors. //I prefer 2 myself, but 3 is a nice alternative with a little more effect (but harsher on the highlight and shadows) and it's the fastest formula. /*-----------------------------------------------------------. / Sepia settings / '-----------------------------------------------------------*/ #define ColorTone float3(1.40, 1.10, 0.90) //[0.00 to 2.55, 0.00 to 2.55, 0.00 to 2.55] What color to tint the image #define GreyPower 0.11 //[0.00 to 1.00] How much desaturate the image before tinting it #define SepiaPower 0.58 //[0.00 to 1.00] How much to tint the image /*-----------------------------------------------------------. / Vignette settings / '-----------------------------------------------------------*/ #define VignetteRatio 1.00 //[0.15 to 6.00] Sets a width to height ratio. 1.00 (1/1) is perfectly round, while 1.60 (16/10) is 60 % wider than it's high. #define VignetteRadius 1.00 //[-1.00 to 3.00] lower values = stronger radial effect from center #define VignetteAmount -1.00 //[-2.00 to 1.00] Strength of black. -2.00 = Max Black, 1.00 = Max White. #define VignetteSlope 8 //[1 to 16] How far away from the center the change should start to really grow strong (odd numbers cause a larger fps drop than even numbers) #define VignetteCenter float2(0.500, 0.500) //[0.000 to 1.000, 0.000 to 1.000] Center of effect. /*-----------------------------------------------------------. / Dither settings / '-----------------------------------------------------------*/ #define dither_method 2 //[1 or 2] 1 = Ordering dithering (good and very fast), 2 = Random dithering (even better dithering but not as fast) //Note that the patterns used by Dither, makes an image harder to compress. //This can make your screenshots and video recordings take up more space. /*-----------------------------------------------------------. / Border settings / '-----------------------------------------------------------*/ //No settings yet, beyond switching it on or off in the top section. /*-----------------------------------------------------------. / ColorBlind mode settings / '-----------------------------------------------------------*/ #define colorblind_mode 1 //[1|2|3] 1 = protonope, 2 = deuteranope, 3 = tritanope. /*-----------------------------------------------------------. / Splitscreen settings / '-----------------------------------------------------------*/ #define splitscreen_mode 1 //[1|2|3|4|5] 1 = Vertical 50/50 split, 2 = Vertical 25/50/25 split, 3 = Vertical 50/50 angled split, 4 = Horizontal 50/50 split, 5 = Horizontal 25/50/25 split /*-----------------------------------------------------------. / Key settings / '-----------------------------------------------------------*/ // This is the section where you can define your own key mapping // See the following URL to find out what keycode a key has: // http://www.cambiaresearch.com/articles/15/javascript-char-codes-key-codes // key_toggle_sweetfx = 123 (F12) // key_screenshot = 44 (Print Screen) // key_reload_sweetfx = 19 (Pause Break) /*-----------------------------------------------------------. / Misc settings / '-----------------------------------------------------------*/ // You can load and chain other DirectX wrappers (ENB, Helix, Windower...) // If the external wrapper is already named d3d9.dll, rename it into // something else like "d3d9_enb.dll" (note that even if this is commented it actually works) // external_d3d9_wrapper = none // external_dxgi_wrapper = none

You need to be logged in to post a comment