SweetFX Settings DB
Latest forum threads
1 hour, 39 minutes ago
3 hours, 5 minutes ago
3 hours, 6 minutes ago
3 hours, 46 minutes ago

RL-FX Battlefield 3 VIP(Updated+DL-Link)

Preset for Battlefield 3
Created by elajits
Added Feb. 12, 2013
Shader used: SweetFX 1.2
Preset description:
Using Sweetfx 2.0A Many have issues to install this so, Here are all the files that is needed Enjoy (Updated settings inside) http://www.mediafire.com/?x2ggjycpk3zh7g7
Download preset Show / Hide settings
/*-----------------------------------------------------------. / Choose effects / '-----------------------------------------------------------*/ // Set to 1 for ON or 0 for OFF #define USE_SMAA_ANTIALIASING 1 //[0 or 1] SMAA Anti-aliasing : Smoothens jagged lines using the SMAA technique. #define USE_FXAA_ANTIALIASING 0 //[0 or 1] FXAA Anti-aliasing : Smoothens jagged lines using the FXAA technique. WIP - Currently only works in DX9 and you need to use the FXAA injector dlls. #define USE_LUMASHARPEN 1//[0 or 1] LumaSharpen : Also sharpens the antialiased edges which makes them less smooth - I'm working on fixing that. #define USE_BLOOM 1 //[0 or 1] Bloom : Makes bright lights bleed their light into their surroundings (relatively high performance cost) #define USE_HDR 0 //[0 or 1] HDR : Not actual HDR - It just tries to mimic an HDR look (relatively high performance cost) #define USE_TECHNICOLOR 1 //[0 or 1] TECHNICOLOR : Attempts to mimic the look of an old movie using the Technicolor three-strip color process (Techicolor Process 4) #define USE_DPX 1 //[0 or 1] Cineon DPX : Should make the image look like it's been converted to DXP Cineon - basically it's another movie-like look similar to technicolor. #define USE_LIFTGAMMAGAIN 0 //[0 or 1] Lift Gamma Gain : Adjust brightness and color of shadows, midtones and highlights (avoids clipping) #define USE_TONEMAP 1 //[0 or 1] Tonemap : Adjust gamma, exposure, saturation, bleach and defog. (may cause clipping) #define USE_VIBRANCE 1 //[0 or 1] Vibrance : Intelligently saturates (or desaturates if you use negative values) the pixels depending on their original saturation. #define USE_CURVES 0 //[0 or 1] Curves : Contrast adjustments using S-curves. #define USE_CARTOON 1 //[0 or 1] Cartoon : "Toon"s the image #define USE_SEPIA 0 //[0 or 1] Sepia : Sepia tones the image. #define USE_VIGNETTE 1 //[0 or 1] Vignette : Darkens the edges of the image to make it look more like it was shot with a camera lens. May cause banding artifacts. #define USE_CA 1 //[0 or 1] Chromatic aberration #define USE_DITHER 1 //[0 or 1] Dither : Applies dithering to simulate more colors than your monitor can display. This lessens banding artifacts (mostly caused by Vignette) #define USE_BORDER 1 //[0 or 1] Border : Makes the screenedge black as a workaround for the bright edge that forcing some AA modes sometimes causes. #define USE_SPLITSCREEN 0 //[0 or 1] Splitscreen : Enables the before-and-after splitscreen comparison mode. /*-----------------------------------------------------------. / SMAA Anti-aliasing settings / '-----------------------------------------------------------*/ #define SMAA_THRESHOLD 0.05 // [0.01 to 0.20] Edge detection threshold #define SMAA_MAX_SEARCH_STEPS 98 // [0 to 98] Determines the radius SMAA will search for aliased edges #define SMAA_MAX_SEARCH_STEPS_DIAG 16 // [0 to 20] Determines the radius SMAA will search for diagonal aliased edges #define SMAA_CORNER_ROUNDING 0 //25 // [0 to 100] Determines the percent of antialiasing to apply to corners // -- Advanced SMAA settings -- #define COLOR_EDGE_DETECTION 1 //[0 or 1] 1 Enables color edge detection (slower but more acurate) - 0 uses luma edge detection (faster) #define SMAA_DIRECTX9_LINEAR_BLEND 0 //[0 or 1] Using DX9 HARDWARE? (software version doesn't matter) if so this needs to be 1 - If not, leave it at 0. /*-----------------------------------------------------------. / FXAA Anti-aliasing settings / '-----------------------------------------------------------*/ #define FXAA_QUALITY__PRESET 9 //[1 to 9] Choose the quality preset #define fxaa_Subpix 0.400 //[0.000 to 1.000] Choose the amount of sub-pixel aliasing removal #define fxaa_EdgeThreshold 0.250 //[0.000 to 1.000] The minimum amount of local contrast required to apply algorithm #define fxaa_EdgeThresholdMin 0.060 //[0.000 to 1.000] Trims the algorithm from processing darks /*-----------------------------------------------------------. / LumaSharpen settings / '-----------------------------------------------------------*/ // -- Sharpening -- #define sharp_strength 1.00 //[0.10 to 3.00] Strength of the sharpening #define sharp_clamp 0.100 //[0.000 to 1.000] Limits maximum amount of sharpening a pixel recieves - Default is 0.035 // -- Advanced sharpening settings -- #define pattern 2 //[1|2|3|4] Choose a sample pattern. 1 = Fast, 2 = Normal, 3 = Wider, 4 = Pyramid shaped. #define offset_bias 0.8 //[0.0 to 6.0] Offset bias adjusts the radius of the sampling pattern. //I designed the pattern for offset_bias 1.0, but feel free to experiment. // -- Debug sharpening settings -- #define show_sharpen 0 //[0 or 1] Visualize the strength of the sharpen (multiplied by 4 to see it better) /*-----------------------------------------------------------. / Bloom settings / '-----------------------------------------------------------*/ #define BloomThreshold 20.00 //[0.00 to 50.00] Threshold for what is a bright light (that causes bloom) and what isn't. #define BloomPower 0.690 //[0.000 to 8.000] Strength of the bloom #define BloomWidth 0.0690 //[0.0000 to 1.0000] Width of the bloom /*-----------------------------------------------------------. / HDR settings / '-----------------------------------------------------------*/ #define HDRPower 0.80 //[0.00 to 8.00] Strangely lowering this makes the image brighter #define radius2 0.50 //[0.00 to 8.00] Raising this seems to make the effect stronger and also brighter /*-----------------------------------------------------------. / TECHNICOLOR settings / '-----------------------------------------------------------*/ #define TechniAmount 0.05 //[0.0 to 1.0] #define TechniPower 3.8 //[0.0 to 8.0] #define redNegativeAmount 0.50 //[0.0 to 1.0] #define greenNegativeAmount 0.55 //[0.0 to 1.0] #define blueNegativeAmount 0.60 //[0.0 to 1.0] /*-----------------------------------------------------------. / Cineon DPX settings / '-----------------------------------------------------------*/ #define Red 15.0 //[1.0 to 15.0] #define Green 15.0 //[1.0 to 15.0] #define Blue 15.0 //[1.0 to 15.0] #define ColorGamma 1.0 //[0.1 to 2.5] Adjusts the colorfulness of the effect in a manner similar to Vibrance. 1.0 is neutral. #define DPXSaturation 1.0 //[0.0 to 8.0] Adjust saturation of the effect. 1.0 is neutral. #define RedC 0.36 //[0.60 to 0.20] #define GreenC 0.36 //[0.60 to 0.20] #define BlueC 0.34 //[0.60 to 0.20] #define Blend 0.11 //[0.00 to 1.00] How strong the effect should be. /*-----------------------------------------------------------. / Lift Gamma Gain settings / '-----------------------------------------------------------*/ #define RGB_Lift float3(0.980, 0.980, 0.980) //[0.000 to 2.000] Adjust shadows for Red, Green and Blue #define RGB_Gamma float3(0.990, 0.990, 0.990) //[0.000 to 2.000] Adjust midtones for Red, Green and Blue #define RGB_Gain float3(1.060, 1.060, 1.060) //[0.000 to 2.000] Adjust highlights for Red, Green and Blue /*-----------------------------------------------------------. / Tonemap settings / '-----------------------------------------------------------*/ #define Gamma 1.1 //[0.000 to 2.000] Adjust midtones #define Exposure 0.00 //[-1.000 to 1.000] Adjust exposure #define Saturation 0.00 //[-1.000 to 1.000] Adjust saturation #define Bleach 0.00 //[0.000 to 1.000] Brightens the shadows and fades the colors #define Defog 0.010 //[0.000 to 1.000] How much of the color tint to remove #define FogColor float3(0.00, 0.00, 2.55) //[0.00 to 2.55, 0.00 to 2.55, 0.00 to 2.55] What color to remove - default is blue /*-----------------------------------------------------------. / Vibrance settings / '-----------------------------------------------------------*/ #define Vibrance 0.45 //[-1.00 to 1.00] Intelligently saturates (or desaturates if you use negative values) the pixels depending on their original saturation. /*-----------------------------------------------------------. / Curves settings / '-----------------------------------------------------------*/ #define Curves_contrast 0.20 //[-1.00 to 1.00] The amount of contrast you want // -- Advanced curve settings -- #define Curves_formula 2 //[1|2|3|4|5|6|7] The constrast s-curve you want to use. I prefer 2 myself. /*-----------------------------------------------------------. / Cartoon settings / '-----------------------------------------------------------*/ #define Cartoonpower 2.5 // [0.1 to 10.0 ] The amount of effect /*-----------------------------------------------------------. / Sepia settings / '-----------------------------------------------------------*/ #define ColorTone float3(1.40, 1.10, 0.90) //[0.00 to 1.00, 0.00 to 1.00, 0.00 to 1.00] What color to tint the image #define GreyPower 0.11 //[0.0 to 1.0] How much desaturate the image before tinting it #define SepiaPower 0.58 //[0.0 to 1.0] How much to tint the image /*-----------------------------------------------------------. / Vignette settings / '-----------------------------------------------------------*/ #define VignetteRadius 1.00 //[-1.00 to 3.00] lower values = stronger radial effect from center #define VignetteAmount -1.00 //[-2.00 to 1.00] Strength of black. -2.00 = Max Black, 1.00 = Max White. #define VignetteSlope 8 //[1 to 16] How far away from the center the change should start to really grow strong (odd numbers cause a larger fps drop than even numbers) #define VignetteCenter float2(0.500, 0.500) //[0.00 to 1.00, 0.00 to 1.00] Center of effect. /*-----------------------------------------------------------. / Chromatic aberration / '-----------------------------------------------------------*/ #define outfocus 0.022 // /*-----------------------------------------------------------. / Dither settings / '-----------------------------------------------------------*/ //No settings yet, beyond switching it on or off in the top section. //Note that the checkerboard pattern used by Dither, makes an image harder to compress. //This can make your screenshots and video recordings take up more space. /*-----------------------------------------------------------. / Border settings / '-----------------------------------------------------------*/ //No settings yet, beyond switching it on or off in the top section. /*-----------------------------------------------------------. / Splitscreen settings / '-----------------------------------------------------------*/ #define splitscreen_mode 1 //[1|2|3|4|5] 1 = Vertical 50/50 split, 2 = Vertical 25/50/25 split, 3 = Vertical 50/50 angled split, 4 = Horizontal 50/50 split, 5 = Horizontal 25/50/25 split

Comments

elajits
15 Feb 21:58 CET

New Video Preview

http://www.youtube.com/watch?v=LQgHW2Zr0FY

fantoom
15 Feb 21:50 CET

thanks for the upload, I really appreciate it.

elajits
15 Feb 19:46 CET

here is the sweetfx files that i use!
the settings are a bit updated for my taste i hope you like it anyway :)

http://www.mediafire.com/?x2ggjycpk3zh7g7

elajits
15 Feb 19:14 CET

Okay! i don't know! but i don't think so! :)
Thx

fantoom
15 Feb 17:52 CET

hey man

great work keep it up i try this with sweetfx 2.0

alpha but it didnt work joining

server stuck problem but it work with

sweetfx 2.1 so is any different between the two version

You need to be logged in to post a comment