SweetFX Settings DB
Latest forum threads
1 week, 1 day ago
1 week, 6 days ago
by Noirze
2 weeks, 1 day ago

Lostis - DA:I Preset L&C *Final-UPDATE!*

Created by Losti
Added Dec. 1, 2014
Updated 14 Mar 12:37 CET
Shader used: SweetFX 1.5
Preset description:
Lightning and coloring much improved to vanilla. . . <<< Updated: 15.12.2013 >>> HDR-Lightening improved for less over-lightening. . . IMPORTANT: +++++++++++ Please use the "new" Injector, posted below for this Preset-Version-Update !!!! _________________________________________________________________________________________________ . . NOTE: The effects at the screenshots (LOW RES !!!!) are not as impressive as its in the game !! >>>> Adjust general Brightness via your Display, Gamma in game or via graphic-driver settings if needed. . Ingame Gamma: 0.55 . Nvidia driver changes for me: Contrast +60 %, digital color corretion: +60 %. . Please use the correct Injector . Download for the version I used for DA:I: (to ensure you will get the same results!!!!!!!!) . Windows 7 (normal injection) / Windows 8.1 (RadeonProInjection) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://www.share-online.biz/dl/D0PL97LNARB >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> . . Download file does not includes the SweetFX_settings.txt . ==> Dont forget to add a SweetFX_settings.txt or if RadeonPro used, to Import a SweetFX_settings.txt
Download preset Show / Hide settings
/*-----------------------------------------------------------. / Choose effects / '-----------------------------------------------------------*/ // Set to 1 for ON or 0 for OFF #define USE_SMAA_ANTIALIASING 1 // [0 or 1] SMAA Anti-aliasing : Smoothens jagged lines using the SMAA technique. #define USE_FXAA_ANTIALIASING 0 // [0 or 1] FXAA Anti-aliasing : Smoothens jagged lines using the FXAA technique #define USE_CA 0 // [0 or 1] Chromatic aberration. You can only use Chromatic Aberration OR the Explosion Shader. Not both at the same time. #define USE_EXPLOSION 0 // [0 or 1] Explosion : Scatters the pixels, making the image look fuzzy. #define USE_CARTOON 0 // [0 or 1] Cartoon : "Toon"s the image.(Interferes with SMAA, CRT, Bloom, HDR and Lumasharpen) #define USE_LEVELS 1 // [0 or 1] Levels : Sets a new black and white point. This increases contrast but causes clipping. Use Curves instead if you want to avoid that. #define USE_ADVANCED_CRT 0 // [0 or 1] Advanced CRT : Simulates an old CRT TV display. Set gaussian blur along with it to get a halation effect #define USE_BLOOM 1 // [0 or 1] Bloom : Makes bright lights bleed their light into their surroundings (relatively high performance cost) #define USE_HDR 1 // [0 or 1] HDR : Not actual HDR - It just tries to mimic an HDR look (relatively high performance cost) #define USE_LUMASHARPEN 1 // [0 or 1] LumaSharpen : Also sharpens the antialiased edges which makes them less smooth - I'm working on fixing that. #define USE_GAUSSIAN 0 // [0 or 1] Gaussian Blur : can be used to... blur, but also bloom/hazy/glowy look, also unsharp masking #define USE_FILMGRAIN 0 // [0 or 1] Filmgrain effect #define USE_TECHNICOLOR 0 // [0 or 1] TECHNICOLOR : Attempts to mimic the look of an old movie using the Technicolor three-strip color process (Techicolor Process 4) #define USE_DPX 1 // [0 or 1] Cineon DPX : Should make the image look like it's been converted to DXP Cineon - basically it's another movie-like look similar to technicolor. #define USE_MONOCHROME 0 // [0 or 1] Monochrome : Monochrome makes the colors disappear. #define USE_LIFTGAMMAGAIN 1 // [0 or 1] Lift Gamma Gain : Adjust brightness and color of shadows, midtones and highlights (avoids clipping) #define USE_TONEMAP 1 // [0 or 1] Tonemap : Adjust gamma, exposure, saturation, bleach and defog. (may cause clipping) #define USE_VIBRANCE 1 // [0 or 1] Vibrance : Intelligently saturates (or desaturates if you use negative values) the pixels depending on their original saturation. #define USE_CURVES 1 // [0 or 1] Curves : Contrast adjustments using S-curves. #define USE_SEPIA 0 // [0 or 1] Sepia : Sepia tones the image. #define USE_VIGNETTE 0 // [0 or 1] Vignette : Darkens the edges of the image to make it look more like it was shot with a camera lens. May cause banding artifacts. #define USE_DITHER 1 // [0 or 1] Dither : Applies dithering to simulate more colors than your monitor can display. This lessens banding artifacts (mostly caused by Vignette) #define USE_BORDER 0 // [0 or 1] Border : Makes the screenedge black as a workaround for the bright edge that forcing some AA modes sometimes causes. #define USE_SPLITSCREEN 0 // [0 or 1] Splitscreen : Enables the before-and-after splitscreen comparison mode. #define USE_CUSTOM 0 // [0 or 1] Custom : Write your own shader by editing custom.h, and then enable it here. /*-----------------------------------------------------------. / SMAA Anti-aliasing settings / '-----------------------------------------------------------*/ #define SMAA_THRESHOLD 0.2 // [0.05 to 0.20] Edge detection threshold. If SMAA misses some edges try lowering this slightly. I prefer between 0.08 and 0.12. #define SMAA_MAX_SEARCH_STEPS 32 // [0 to 98] Determines the radius SMAA will search for aliased edges #define SMAA_MAX_SEARCH_STEPS_DIAG 16 // [0 to 16] Determines the radius SMAA will search for diagonal aliased edges #define SMAA_CORNER_ROUNDING 50 // [0 to 100] Determines the percent of antialiasing to apply to corners. 0 seems to affect fine text the least so it's the default. // -- Advanced SMAA settings -- #define COLOR_EDGE_DETECTION 1 // [0 or 1] 1 Enables color edge detection (slower but slightly more acurate) - 0 uses luma edge detection (faster) #define SMAA_DIRECTX9_LINEAR_BLEND 1 // [0 or 1] Using DX9 HARDWARE? (software version doesn't matter) if so this needs to be 1 - If not, leave it at 0. //Enable this only if you use a Geforce 7xxx series or older card, or a Radeon X1xxx series or older card. /*-----------------------------------------------------------. / FXAA Anti-aliasing settings / '-----------------------------------------------------------*/ #define FXAA_QUALITY__PRESET 39 // [1 to 39] Choose the quality preset. 39 is the highest quality. #define fxaa_Subpix 0.1 // [0.000 to 1.000] Choose the amount of sub-pixel aliasing removal. #define fxaa_EdgeThreshold 0.01 // [0.000 to 1.000] Edge detection threshold. The minimum amount of local contrast required to apply algorithm. #define fxaa_EdgeThresholdMin 0.3 // [0.000 to 1.000] Darkness threshold. Trims the algorithm from processing darks. /*-----------------------------------------------------------. / Chromatic aberration / '-----------------------------------------------------------*/ #define outfocus 0.016 // [0.00 to 1.000] How strong the effect should be. /*-----------------------------------------------------------. / Explosion settings / '-----------------------------------------------------------*/ #define Explosion_Radius 0 // [0.2 to 100.0] Amount of effect you want. /*-----------------------------------------------------------. / Cartoon settings / '-----------------------------------------------------------*/ #define CartoonPower 0.05 // [0.1 to 10.0] Amount of effect you want. #define CartoonEdgeSlope 8 // [0.1 to 8.0] Raise this to filter out fainter edges. You might need to increase the power to compensate. Whole numbers are faster. /*----------------------------------------------------------. / Levels settings / '----------------------------------------------------------*/ #define Levels_black_point -9.0 // [0 to 255] The black point is the new black - literally. Everything darker than this will become completely black. Default is 16.0 #define Levels_white_point 255 // [0 to 255] The new white point. Everything brighter than this becomes completely white. Default is 235.0 //Colors between the two points will stretched, which increases contrast, but details above and below the points are lost (this is called clipping). /*----------------------------------------------------------. / Advanced CRT settings / '----------------------------------------------------------*/ #define CRTAmount 1.00 // [0.00 to 1.00] Amount of CRT effect you want #define CRTResolution 1.0 // [1.0 to 8.0] Input size coefficent (low values gives the "low-res retro look"). Default is 1.2 #define CRTgamma 2.2 // [0.0 to 4.0] Gamma of simulated CRT (default 2.2) #define CRTmonitorgamma 2.4 // [0.0 to 4.0] Gamma of display monitor (typically 2.2 is correct) #define CRTBrightness 1.2 // [1.0 to 3.0] Used to boost brightness a little. Default is 1.0 #define CRTScanlineIntensity 2.0 // [2.0 to 4.0] Scanlines intensity (use integer values preferably). Default is 2.0 #define CRTScanlineGaussian 1 // [0 or 1] Use the "new nongaussian scanlines bloom effect". Default is on #define CRTCurvature 1 // [[0 or 1] "Barrel effect" enabled (1) or off (0) #define CRTCurvatureRadius 2.0 // [0.0 to 2.0] Curvature Radius (only effective when Curvature is enabled). Default is 1.5 #define CRTCornerSize 0.0100 // [0.0000 to 0.0020] Higher values, more rounded corner. Default is 0.001 #define CRTDistance 2.00 // [0.00 to 4.00] Simulated distance from viewer to monitor. Default is 2.00 #define CRTAngleX 0.00 // [-0.20 to 0.20] Tilt angle in radians (X coordinates) #define CRTAngleY -0.15 // [-0.20 to 0.20] Tilt angle in radians (Y coordinates). (Value of -0.15 gives the 'arcade tilt' look) #define CRTOverScan 1.00 // [1.00 to 1.10] Overscan (e.g. 1.02 for 2% overscan). Default is 1.01 #define CRTOversample 0 // [0 or 1] Enable 3x oversampling of the beam profile (warning : performance hit) /*-----------------------------------------------------------. / Bloom settings / '-----------------------------------------------------------*/ #define BloomThreshold 50 // [0.00 to 50.00] Threshold for what is a bright light (that causes bloom) and what isn't. #define BloomPower 0.01 // [0.000 to 8.000] Strength of the bloom #define BloomWidth 1 // [0.0000 to 1.0000] Width of the bloom /*-----------------------------------------------------------. / HDR settings / '-----------------------------------------------------------*/ #define HDRPower 4.55 // [0.00 to 8.00] Strangely lowering this makes the image brighter #define radius2 1.12 // [0.00 to 8.00] Raising this seems to make the effect stronger and also brighter /*-----------------------------------------------------------. / LumaSharpen settings / '-----------------------------------------------------------*/ // -- Sharpening -- #define sharp_strength 1.3 // [0.10 to 3.00] Strength of the sharpening #define sharp_clamp 0.01 // [0.000 to 1.000] Limits maximum amount of sharpening a pixel recieves - Default is 0.035 // -- Advanced sharpening settings -- #define pattern 3 // [1|2|3|4] Choose a sample pattern. 1 = Fast, 2 = Normal, 3 = Wider, 4 = Pyramid shaped. #define offset_bias 0.5 // [0.0 to 6.0] Offset bias adjusts the radius of the sampling pattern. //I designed the pattern for offset_bias 1.0, but feel free to experiment. // -- Debug sharpening settings -- #define show_sharpen 0 // [0 or 1] Visualize the strength of the sharpen (multiplied by 4 to see it better) /*-----------------------------------------------------------. / Gaussian Blur settings / '-----------------------------------------------------------*/ #define GaussEffect 0 // [0|1|2|3] 0 = Blur, 1 = Unsharpmask (expensive), 2 = Bloom, 3 = Sketchy. Default is 2 #define GaussQuality 3 // [0|1|2|3] Warning: 2 and 3 are expensive. Default is 1 #define GaussSigma 4 // [1 to 4] The higher the wider blur/bloom is (only effective when Bloom selected) #define GaussBloomWarmth 1 // [0|1|2] "Temperature" of the bloom - 0 = neutral, 1 = warm, 2 = hazy/foggy #define GaussThreshold 0.50 // [0.00 to 1.00] [DX10/11 only] Threshold for what is a bright light (that causes bloom) and what isn't. #define GaussExposure 043.0 // [0.00 to 100.00] [DX10/11 only] Exposure of the effect (the lower the brighter) #define GaussStrength 10.15 // [0.00 to 1.00] Amount of effect blended into the final image /*-----------------------------------------------------------. / Film grain settings / '-----------------------------------------------------------*/ #define FilmGrainIntensity 0.6 // [0.00 to 1.00] Intensity of grain. Default is 0.46 #define FilmGrainExposure 20 // [0 to 100] Grain Exposure. Default is 40 (Lower -> darker noise) #define FilmGrainSize 6 // [0 to 10] Size of the grain. Default is 2 (Higher -> thinner noise) /*-----------------------------------------------------------. / TECHNICOLOR settings / '-----------------------------------------------------------*/ #define TechniAmount 0.46 // [0.00 to 1.00] #define TechniPower 4.0 // [0.00 to 8.00] #define redNegativeAmount 0.74 // [0.00 to 1.00] #define greenNegativeAmount 0.83 // [0.00 to 1.00] #define blueNegativeAmount 0.9 // [0.00 to 1.00] /*-----------------------------------------------------------. / Cineon DPX settings / '-----------------------------------------------------------*/ #define Red 10 // [1.0 to 15.0] Some kind of filter? Higher numbers made that color less affected. #define Green 10 // [1.0 to 15.0] Some kind of filter? Higher numbers made that color less affected. #define Blue 10 // [1.0 to 15.0] Some kind of filter? Higher numbers made that color less affected. #define ColorGamma 1 // [0.1 to 2.5] Adjusts the colorfulness of the effect in a manner similar to Vibrance. 1.0 is neutral. #define DPXSaturation 1.2 // [0.0 to 8.0] Adjust saturation of the effect. 1.0 is neutral. #define RedC 0.90 // [0.60 to 0.20] #define GreenC 0.60 // [0.60 to 0.20] #define BlueC 0.80 // [0.60 to 0.20] #define Blend 0.05 // [0.00 to 1.00] How strong the effect should be /*-----------------------------------------------------------. / Monochrome settings / '-----------------------------------------------------------*/ #define Monochrome_conversion_values float3(0.18, 0.41, 0.41) // [0.00 to 1.00] Percentage of RGB to include (should sum up to 1.00) /*-----------------------------------------------------------. / Lift Gamma Gain settings / '-----------------------------------------------------------*/ #define RGB_Lift float3(1.00, 1.02, 1.02) // [0.000 to 2.000] Adjust shadows for Red, Green and Blue #define RGB_Gamma float3(0.99, 1.00, 1.00) // [0.000 to 2.000] Adjust midtones for Red, Green and Blue #define RGB_Gain float3(1.29, 1.29, 1.29) // [0.000 to 2.000] Adjust highlights for Red, Green and Blue /*-----------------------------------------------------------. / Tonemap settings / '-----------------------------------------------------------*/ #define Gamma 0.58 // [0.000 to 2.000] Adjust midtones #define Exposure 0.36 // [-1.000 to 1.000] Adjust exposure #define Saturation 0.0 // [-1.000 to 1.000] Adjust saturation #define Bleach 0.0 // [0.000 to 1.000] Brightens the shadows and fades the colors #define Defog 0.15 // [0.000 to 1.000] How much of the color tint to remove #define FogColor float3(0.23, 0.31, 0.31) // [0.00 to 2.55, 0.00 to 2.55, 0.00 to 2.55] What color to remove - default is blue /*-----------------------------------------------------------. / Vibrance settings / '-----------------------------------------------------------*/ #define Vibrance 0.2 // [-1.00 to 1.00] Intelligently saturates (or desaturates if you use negative values) the pixels depending on their original saturation. #define Vibrance_RGB_balance float3(-0.9,-1.3,-0.5) // [-10.00 to 10.00,-10.00 to 10.00,-10.00 to 10.00] A per channel multiplier to the Vibrance strength so you can give more boost to certain colors over others /*-----------------------------------------------------------. / Curves settings / '-----------------------------------------------------------*/ #define Curves_mode 2 // [0|1|2] Choose what to apply contrast to. 0 = Luma, 1 = Chroma, 2 = both Luma and Chroma. Default is 0 (Luma) #define Curves_contrast 1.1 // [-1.00 to 1.00] The amount of contrast you want // -- Advanced curve settings -- #define Curves_formula 3 // [1|2|3|4|5|6|7|8|9|10] The contrast s-curve you want to use. //1 = Sine, 2 = Abs split, 3 = Smoothstep, 4 = Exp formula, 5 = Simplified Catmull-Rom (0,0,1,1), 6 = Perlins Smootherstep //7 = Abs add, 8 = Techicolor Cinestyle, 9 = Parabola, 10 = Half-circles. //Note that Technicolor Cinestyle is practically identical to Sine, but runs slower. In fact I think the difference might only be due to rounding errors. //I prefer 2 myself, but 3 is a nice alternative with a little more effect (but harsher on the highlight and shadows) and it's the fastest formula. /*-----------------------------------------------------------. / Sepia settings / '-----------------------------------------------------------*/ #define ColorTone float3(1.0, 1.0, 1.0) // [0.00 to 2.55, 0.00 to 2.55, 0.00 to 2.55] What color to tint the image #define GreyPower 0.0 // [0.00 to 1.00] How much desaturate the image before tinting it #define SepiaPower 0.58 // [0.00 to 1.00] How much to tint the image /*-----------------------------------------------------------. / Vignette settings / '-----------------------------------------------------------*/ #define VignetteType 1 // [1|2|3] 1 = Original, 2 = New, 3 = TV style #define VignetteRatio 1.00 // [0.15 to 6.00] Sets a width to height ratio. 1.00 (1/1) is perfectly round, while 1.60 (16/10) is 60 % wider than it's high. #define VignetteRadius 1.00 // [-1.00 to 3.00] lower values = stronger radial effect from center #define VignetteAmount -0.40 // [-2.00 to 1.00] Strength of black. -2.00 = Max Black, 1.00 = Max White. #define VignetteSlope 6 // [2 to 16] How far away from the center the change should start to really grow strong (odd numbers cause a larger fps drop than even numbers) #define VignetteCenter float2(0.500, 0.500) // [0.000 to 1.000, 0.000 to 1.000] Center of effect for VignetteType 1. 2 and 3 do not obey this setting. /*-----------------------------------------------------------. / Dither settings / '-----------------------------------------------------------*/ #define dither_method 1 // [1 or 2] 1 = Ordered dithering (very good and very fast), 2 = Random dithering (different but slightly slower dithering) //Note that the patterns used by Dither, makes an image harder to compress. //This can make your screenshots and video recordings take up more space. /*-----------------------------------------------------------. / Border settings / '-----------------------------------------------------------*/ #define border_width float2(1,100) // [0 to 2048, 0 to 2048] (X,Y)-width of the border. Measured in pixels. #define border_color float3(0, 0, 0) // [0 to 255, 0 to 255, 0 to 255] What color the border should be. In integer RGB colors, meaning 0,0,0 is black and 255,255,255 is full white. /*-----------------------------------------------------------. / Splitscreen settings / '-----------------------------------------------------------*/ #define splitscreen_mode 1 // [1|2|3|4|5|6] 1 = Vertical 50/50 split, 2 = Vertical 25/50/25 split, 3 = Vertical 50/50 angled split, // 4 = Horizontal 50/50 split, 5 = Horizontal 25/50/25 split, 6 = Curvy vertical 50/50 split /*-----------------------------------------------------------. / Key settings / '-----------------------------------------------------------*/ // This is the section where you can define your own key mapping // See the following URL to find out what keycode a key has: // http://www.cambiaresearch.com/articles/15/javascript-char-codes-key-codes // key_toggle_sweetfx = 145 // key_screenshot = 44 // key_reload_sweetfx = 19 /*-----------------------------------------------------------. / Misc settings / '-----------------------------------------------------------*/ // You can load and chain other DirectX wrappers (ENB, Helix, Windower...) // If the external wrapper is already named d3d9.dll, rename it into // something else like "d3d9_enb.dll" (note that even if this is commented it actually works) // external_d3d9_wrapper = none // external_dxgi_wrapper = none

Comments

Blaithin
13 Apr 14:25 CEST

The google drive link below is Losti's preset of the Boulataur Injector, but in google drive so it's more accessible :)

Blaithin
13 Apr 14:24 CEST

For those people who are really sick of that questionable link, and the file sharing nightmare that is throttled downloads and popup ads.

https://drive.google.com/file/d/0B8rSksK0HGA-OG81a0kzbnBfbmc/view

Valan
10 Jan 02:22 CET

Hello Losti,

Your preset looks really beautiful and I would love to try it but I'm afraid the link for the injector won't work for me. Could you help me out please because I would love to play this game with your preset.

Thank you for sharing your work with us.

Losti
17 Nov 19:45 CET

"Your link included a virus, that or the site you uploaded to added one."

Bullshit!!!

lefeinnoel
14 Sep 03:32 CEST

Your link included a virus, that or the site you uploaded to added one.

Doombug
14 Mar 14:58 CET

Never mind I finally got it working, I was simply overlooking something and being an idiot thanks for the preset

Doombug
14 Mar 01:45 CET

This looks great but just doesn't work a d3d9.dll (dx9) injector for a dx11 game... tried to port it manually to a newer version of sweetfx and also again to the newest version of reshade but a lot of settings aren't valid like -9 when the lowest setting is 0 or 0.80 when the highest is 0.60, I'm sure it's working on others... or they'd be a lot of complaints

Losti
30 May 10:14 CEST

I think it sould work with ReShade / SweetFX 2.0 too, have you tryed it ?

Ruhagan
3 May 03:22 CEST

Hi, I tried all sweetFX versions I could get my hands on and only Reshade (with sfx 2.0) works for me (win8.1x64)... Any way I can convert your config to match my version?

Losti
14 Mar 12:37 CET

You should try that one:
http://www.share-online.biz/dl/D0PL97LNARB
(Link updated)

SP77
15 Feb 22:27 CET

Hi Lotsi. I'm interested in trying your preset. It looks really good, and other players seem to enjoy it. The link for the injector is not good anymore. Could you post a new one. Thanks. Keep up the good work. Take care.

MelissaGT
23 Jan 15:45 CET

I created an account just to comment that I haven't had any of the "ghosting" or "mirroring." I've used it with two different injector downloads, the one posted here and another that was posted on BSN that works with Windows 8.1 (without RadeonPro). However, I actually prefer using RadeonPro. This is by far the best preset I've seen yet! Thank you, Losti!!!

Losti
14 Jan 18:26 CET

Strange, didnt noticed that on my screen. So may you have to reduce in game gama ? Or on your screen or NV driver with contrast and light. Sorry.

discooverlord
13 Jan 04:31 CET

I redownloaded and reinstalled sweetfx with the posted injector just to make sure.

Here are some pictures I uploaded that shows the bugs. The obvious ones are circled in red.
http://imgur.com/a/1QZ9l

It mostly happens in dark areas. There's a mirroring effect. In the Haven jail picture you can see the mirroring effect of the UI skill toolbar if you look closely.

Losti
11 Jan 11:24 CET

Can you make a screenshot for me?
Are you using the injector postet above ?
http://www.share-online.biz/dl/S663PIGN5V6

discooverlord
10 Jan 09:51 CET

This is my favorite preset on this website. Looks very natural without overdoing any one thing.

However, I also have the same problem as optyk. When the image gets too dark there is a mirroring effect. It's most noticable in the UI menus.

Losti
2 Jan 17:01 CET

@optyk

This is not a fault of the Preset. You may have the an other injector.

optyk
31 Dec 00:19 CET

This version produces a 'burn in' or water mark type effect on the screen.

Things like the menu name options, "Inventory", "Armor", "Weapons" are repeated horizontally across the screen and are very noticeable.

It also ruins any Depth of Field and Atmosphere effects by having everything look way too sharp. While the sharpness looks great when up close, it takes away any sense of depth/distance on objects. It also over sharpens companion/ability icons as well.

Your original L&C preset (sfx.thelazy.net/games/preset/2602/) does not have these issues and is way better.

Windows 7, GTX670 4GB, Ultra settings @ 1080p.

Losti
22 Dec 19:06 CET

"low-res screenshots" results of the way i created the "fix"....in windowed mode. The first 5 Screenshots are 1920x1080 or higher and are taken with the lastest version so low-res is only 1280x720 (the rest of the screenshots)
.
.
"new" means that there are some conflicts with my first and my second profile and the used injector....using normal or RadeonPro injection. The injector postet here is working for both. Just want to be sure you will not use an injector that causes problems with radeon pro injection. Nothing realy new. So thats why i put it in "" <-- ^^

Jynxx
22 Dec 16:15 CET

From what I can tell they look good, but why would you use low-res screenshots?
Also, what is different about the "new" injector you say we need to use?

You need to be logged in to post a comment