SweetFX Settings DB
Latest forum threads
14 hours, 31 minutes ago
by fijeba
5 days, 13 hours ago
5 days, 16 hours ago
1 week ago

K-putt'e Config

Created by K-putt
Added March 9, 2015
Updated 7 Sep 20:34 CEST
Shader used: SweetFX 2.0
Preset description:
———————————————————————————————————————————— • You'll need this version to get the same results as me. • (v2.0 Preview 8 by CeeJay.dk | ReShade 0.18.4) • DOWNLOAD HEREsfx.thelazy.net - http://goo.gl/l1isIw • For questions or requests visit the forum - http://sfx.thelazy.net/forum/ • For ReShade support visit the official ReShade forum - http://reshade.me/forum/index • Or visit the official SweetFX subreddit - http://www.reddit.com/r/sweetfx • While you're at it.. why aren't you following me on Twitter or FlickR yet? • Twitter - https://twitter.com/Kputt • FlickR - https://www.flickr.com/photos/k_putt/ ———————————————————————————————————————————— K-putt'e Rouge'ish Assassassin Config •FXAA •LEVELS •LUMASHARPEN •LIFTGAMMAGAIN •VIBRANCE •TONEMAP •CURVES ———————————————————————————————————————————— • You can use SMAA or FXAA. • I prefer FXAA since it also removes the tiny foliage aliasing. • And the in-game FXAA is too blurry. • To enable SMAA set #define USE_SMAA to 1 and #define USE_FXAA to 0 • (Image might get a bit too sharp with SMAA enabled.) ————————————————————————————————————————————
Download preset Show / Hide settings
/*===========================================// // Description // //===========================================// Game: Assassin's Creed Rogue Author: K-putt SweetFX/Injector version: v2.0 Preview 7 by CeeJay.dk / ReShade 0.15.0.000 Description: 888 d8P 888 888 d8b .d8888b. .d888 d8b 888 d8P 888 888 88P d88P Y88b d88P" Y8P 888 d8P 888 888 8P 888 888 888 888d88K 88888b. 888 888 888888 888888 " .d88b. 888 .d88b. 88888b. 888888 888 .d88b. 8888888b 888 "88b 888 888 888 888 d8P Y8b 888 d88""88b 888 "88b 888 888 d88P"88b 888 Y88b 888888 888 888 888 888 888 888 88888888 888 888 888 888 888 888 888 888 888 888 888 Y88b 888 d88P Y88b 888 Y88b. Y88b. Y8b. Y88b d88P Y88..88P 888 888 888 888 Y88b 888 888 Y88b 88888P" "Y88888 "Y888 "Y888 "Y8888 "Y8888P" "Y88P" 888 888 888 888 "Y88888 888 888 888 Y8b d88P 888 "Y88P" K-putt'e Rouge'ish Assassassin Config •FXAA •LEVELS •LUMASHARPEN •LIFTGAMMAGAIN •VIBRANCE •TONEMAP •CURVES //===========================================// // Optional // //===========================================// • You can use SMAA or FXAA. • I prefer FXAA since it also removes the tiny foliage aliasing. • And the in-game FXAA is too blurry. • To enable SMAA set #define USE_SMAA to 1 and #define USE_FXAA to 0 • (Image might get a bit too sharp with SMAA enabled.) //===========================================// // Updates // //===========================================// //===========================================// // Miscellaneous // //===========================================// • You'll need this version to get the same results as me. • (v2.0 Preview 7 by CeeJay.dk | ReShade 0.15.0) • DOWNLOAD HERE • sfx.thelazy.net - http://goo.gl/YTYDSg • For questions or requests visit the forum - http://sfx.thelazy.net/forum/ • Or visit the official SweetFX subreddit - http://www.reddit.com/r/sweetfx //============================================// // Choose // // Effects // //============================================*/ // Effects are listed in the order that they are applied. // Set to 1 for ON or 0 for OFF #define USE_ASCII 0 //[0 or 1] Ascii : Converts the image to Ascii-art. #define USE_CARTOON 0 //[0 or 1] Cartoon : "Toon"s the image. #define USE_SMAA 0 //[0 or 1] SMAA Anti-aliasing : Smoothens jagged lines using the SMAA technique. #define USE_FXAA 1 //[0 or 1] FXAA Anti-aliasing : Smoothens jagged lines using the FXAA technique. #define USE_EXPLOSION 0 //[0 or 1] Explosion : Scatters the pixels, making the image look fuzzy. #define USE_CA 0 //[0 or 1] Chromatic Aberration : Mimics the look of a cheap camera lens, by distorting the colors. #define USE_ADVANCED_CRT 0 //[0 or 1] Advanced CRT : Simulates an old CRT TV display. (has a very high performance cost) #define USE_PIXELART_CRT 0 //[0 or 1] PixelArt CRT : Scanlines for pixel art (high performance cost) #define USE_BLOOM 0 //[0 or 1] Bloom : Makes bright lights bleed their light into their surroundings (relatively high performance cost) #define USE_HDR 0 //[0 or 1] HDR : Not actual HDR - It just tries to mimic an HDR look (relatively high performance cost) #define USE_LUMASHARPEN 1 //[0 or 1] LumaSharpen : Sharpens the image. #define USE_LEVELS 1 //[0 or 1] Levels : Sets a new black and white point. This increases contrast but causes clipping. Use Curves instead if you want to avoid that. #define USE_TECHNICOLOR 0 //[0 or 1] TECHNICOLOR : Attempts to mimic the look of an old movie using the Technicolor three-strip color process (Techicolor Process 4) #define USE_DPX 0 //[0 or 1] Cineon DPX : Should make the image look like it's been converted to DXP Cineon - basically it's another movie-like look similar to technicolor. #define USE_MONOCHROME 0 //[0 or 1] Monochrome : Monochrome makes the colors disappear. #define USE_COLORMATRIX 0 //[0 or 1] Color Matrix : Allows color modification using a user-defined color matrix. #define USE_LIFTGAMMAGAIN 1 //[0 or 1] Lift Gamma Gain : Adjust brightness and color of shadows, midtones and highlights. #define USE_TONEMAP 1 //[0 or 1] Tonemap : Adjust gamma, exposure, saturation, bleach and defog. (may cause clipping) #define USE_VIBRANCE 1 //[0 or 1] Vibrance : Intelligently saturates (or desaturates if you use negative values) the pixels depending on their original saturation. #define USE_CURVES 1 //[0 or 1] Curves : Contrast adjustments using S-curves. #define USE_SEPIA 0 //[0 or 1] Sepia : Sepia tones the image. #define USE_VIGNETTE 0 //[0 or 1] Vignette : Darkens the edges of the image to make it look more like it was shot with a camera lens. May cause banding artifacts. #define USE_FILMGRAIN 0 //[0 or 1] Film Grain : Adds film grain to the image. #define USE_DITHER 0 //[0 or 1] Dither : Applies dithering to simulate more colors than your monitor can display. This lessens banding artifacts (mostly caused by Vignette) #define USE_BORDER 0 //[0 or 1] Border : Can be used to create letterbox borders around the image. #define USE_SPLITSCREEN 0 //[0 or 1] Splitscreen : Enables the before-and-after splitscreen comparison mode. #define USE_TRANSITION 0 //[0 or 1] Transition : Shows a welcome screen and then transitions to the regularly scheduled programming #define USE_DISPLAY_DEPTH 0 //[0 or 1] Display Depth : Enables the possibility to display the depth buffer - You will still need to toogle it on/off with (*) in-game #define USE_CUSTOM 0 //[0 or 1] Custom : Write your own shader by editing custom.h, and then enable it here. //===========================================// // Ascii // // Settings // //===========================================// #define Ascii_input_image 1 //[1 or 2] 1 = Color buffer, 2 = Depth buffer. #define Ascii_spacing 1 //[0 to 9] Determines the spacing between characters. I feel 1 to 3 looks best. #define Ascii_font 1 //[1 or 2] 1 = 5x5 font, 2 = 3x5 font #define Ascii_font_color float3(255, 255, 255) //[0 to 255, 0 to 255, 0 to 255] What color the font should be. In integer RGB colors. #define Ascii_background_color float3(0, 0, 0) //[0 to 255, 0 to 255, 0 to 255] What color the background should be. In integer RGB colors. #define Ascii_swap_colors 0 //Swaps the font and background color when you are too lazy to edit the settings above (I know I am) #define Ascii_invert_brightness 0 //[0 or 1] #define Ascii_font_color_mode 1 //[0 to 2] 0 = font_color, 1 = image color, 2 = colorized grayscale //===========================================// // SMAA Anti Aliasing // // Settings // //===========================================// #define SMAA_THRESHOLD 0.08 //[0.05 to 0.20] Edge detection threshold. If SMAA misses some edges try lowering this slightly. I prefer between 0.08 and 0.12. #define SMAA_MAX_SEARCH_STEPS 25 //[0 to 98] Determines the radius SMAA will search for aliased edges #define SMAA_MAX_SEARCH_STEPS_DIAG 12 //[0 to 16] Determines the radius SMAA will search for diagonal aliased edges #define SMAA_CORNER_ROUNDING 0 //[0 to 100] Determines the percent of antialiasing to apply to corners. 0 seems to affect fine text the least so it's the default. // -- Advanced SMAA settings -- #define SMAA_EDGE_DETECTION 2 //[1|2|3] 1 = Luma edge detection, 2 = Color edge detection, 3 = Depth edge detection #define SMAA_DIRECTX9_LINEAR_BLEND 0 //[0 or 1] Using DX9 HARDWARE? (software version doesn't matter) if so this needs to be 1 - If not, leave it at 0. //Enable this only if you use a Geforce 7xxx series or older card, or a Radeon X1xxx series or older card. // -- SMAA Predication settings -- #define SMAA_PREDICATION 0 //[0 or 1] Enables predication which uses BOTH the color and the depth texture for edge detection to more accurately detect edges. #define SMAA_PREDICATION_THRESHOLD 0.001 // Threshold to be used in the depth buffer. #define SMAA_PREDICATION_SCALE 2.0 // How much to scale the global threshold used for luma or color edge detection when using predication #define SMAA_PREDICATION_STRENGTH 0.4 // How much to locally decrease the threshold. // -- Debug SMAA settings -- #define SMAA_DEBUG_OUTPUT 0 //[0 to 4] 0 = Normal, 1 = edgesTex, 2 = blendTex, 3 = areaTex, 4 = searchTex - Only for troubleshooting. Users don't need to mess with this. //===========================================// // FXAA Anti Aliasing // // Settings // //===========================================// #define FXAA_QUALITY__PRESET 9 //[1 to 9] Choose the quality preset. 9 is the highest quality. #define fxaa_Subpix 0.35 //[0.000 to 1.000] Choose the amount of sub-pixel aliasing removal. Higher values makes the image softer/blurrier. #define fxaa_EdgeThreshold 0.01 //[0.000 to 1.000] Edge detection threshold. The minimum amount of local contrast required to apply algorithm. Similar to SMAA_THRESHOLD #define fxaa_EdgeThresholdMin 0.01 //[0.000 to 1.000] Darkness threshold. Pixels darker than this are not processed in order to increase performance. //===========================================// // Explosion // // Settings // //===========================================// #define Explosion_Radius 2.0 //[0.2 to 100.0] Amount of effect you want. //===========================================// // Chromatic Aberration // // Settings // //===========================================// #define Chromatic_shift float2(2.5,-0.5) //[-100.0 to 100.0, -100.00 to 100.0] Distance (X,Y) in pixels to shift the color components. //For a slightly blurred look try fractional values (.5) between two pixels. #define Chromatic_strength 1.0 //Adjust the strength of the effect. //===========================================// // Levels // // Settings // //===========================================// #define Levels_black_point 3 //[0 to 255] The black point is the new black - literally. Everything darker than this will become completely black. Default is 16.0 #define Levels_white_point 255 //[0 to 255] The new white point. Everything brighter than this becomes completely white. Default is 235.0 //Colors between the two points will stretched, which increases contrast, but details above and below the points are lost (this is called clipping). // -- Debug settings -- #define Levels_highlight_clipping 0 //[0 or 1] Highlight the pixels that clip. Red = Some detail is lost in the highlights, Yellow = All detail is lost in the highlights, // Blue = Some detail is lost in the shadows, Cyan = All detail is lost in the shadows. //===========================================// // Cartoon // // Settings // //===========================================// #define CartoonPower 1.5 //[0.1 to 10.0] Amount of effect you want. #define CartoonEdgeSlope 1.5 //[0.1 to 8.0] Raise this to filter out fainter edges. You might need to increase the power to compensate. Whole numbers are faster. //===========================================// // Advanced CRT // // Settings // //===========================================// #define CRTAmount 1.00 //[0.00 to 1.00] Amount of CRT effect you want #define CRTResolution 2.0 //[1.0 to 8.0] Input size coefficent (low values gives the "low-res retro look"). Default is 1.2 #define CRTgamma 2.2 //[0.0 to 4.0] Gamma of simulated CRT (default 2.2) #define CRTmonitorgamma 2.4 //[0.0 to 4.0] Gamma of display monitor (typically 2.2 is correct) #define CRTBrightness 1.2 //[1.0 to 3.0] Used to boost brightness a little. Default is 1.0 #define CRTScanlineIntensity 2.0 //[2.0 to 4.0] Scanlines intensity (use integer values preferably). Default is 2.0 #define CRTScanlineGaussian 1 //[0 or 1] Use the "new nongaussian scanlines bloom effect". Default is on #define CRTCurvature 1 //[[0 or 1] "Barrel effect" enabled (1) or off (0) #define CRTCurvatureRadius 2.0 //[0.0 to 2.0] Curvature Radius (only effective when Curvature is enabled). Default is 1.5 #define CRTCornerSize 0.0100 //[0.0000 to 0.0020] Higher values, more rounded corner. Default is 0.001 #define CRTDistance 2.00 //[0.00 to 4.00] Simulated distance from viewer to monitor. Default is 2.00 #define CRTAngleX 0.00 //[-0.20 to 0.20] Tilt angle in radians (X coordinates) #define CRTAngleY -0.15 //[-0.20 to 0.20] Tilt angle in radians (Y coordinates). (Value of -0.15 gives the 'arcade tilt' look) #define CRTOverScan 1.00 //[1.00 to 1.10] Overscan (e.g. 1.02 for 2% overscan). Default is 1.01 #define CRTOversample 0 //[0 or 1] Enable 3x oversampling of the beam profile (warning : performance hit) //===========================================// // Pixel-Art CRT // // Settings // //===========================================// // -- Emulated input resolution -- #define PixelArtCRT_resolution_mode 1 //[1 or 2] 1 = Ratio, 2 = Fixed resolution #define PixelArtCRT_resolution_ratio (1.0/4.0) // #define PixelArtCRT_fixed_resolution float2(320.0,160.0) // -- Hardness -- #define PixelArtCRT_hardScan -24.0 // Hardness of scanline : -8.0 = soft, -16.0 = medium #define PixelArtCRT_hardPix -24.0 // Hardness of pixels in scanline : -2.0 = soft, -4.0 = hard // -- Display warp -- #define PixelArtCRT_warp float2(1.0/64.0,1.0/24.0) // Display warp : 0.0 = none , 1.0/8.0 = extreme // -- Type of shadow mask -- #define PixelArtCRT_ShadowMask 3 // Type of shadow mask : 1 = Very compressed TV style shadow mask, 2 = Aperture-grille, 3 = Stretched VGA style shadow mask, 4 = VGA style shadow mask // -- Amount of shadow mask -- #define PixelArtCRT_maskDark 0.5 // #define PixelArtCRT_maskLight 1.5 // // -- Falloff shape -- #define PixelArtCRT_shape 3.0 // Falloff shape : 1.0 = exp(x), 1.25 = in between, 2.0 = gaussian, 3.0 = more square // -- Amp signal -- #define PixelArtCRT_overdrive 1.25 // //===========================================// // Bloom // // Settings // //===========================================// #define BloomThreshold 20.25 //[0.00 to 50.00] Threshold for what is a bright light (that causes bloom) and what isn't. #define BloomPower 1.446 //[0.000 to 8.000] Strength of the bloom #define BloomWidth 0.0142 //[0.0000 to 1.0000] Width of the bloom //===========================================// // HDR // // Settings // //===========================================// #define HDRPower 1.30 //[0.00 to 8.00] Strangely lowering this makes the image brighter #define radius2 0.87 //[0.00 to 8.00] Raising this seems to make the effect stronger and also brighter //===========================================// // Lumasharpen // // Settings // //===========================================// // -- Sharpening -- #define sharp_strength 0.6 //[0.10 to 3.00] Strength of the sharpening #define sharp_clamp 0.025 //[0.000 to 1.000] Limits maximum amount of sharpening a pixel recieves - Default is 0.035 // -- Advanced sharpening settings -- #define pattern 2 //[1|2|3|4] Choose a sample pattern. 1 = Fast, 2 = Normal, 3 = Wider, 4 = Pyramid shaped. #define offset_bias 1.0 //[0.0 to 6.0] Offset bias adjusts the radius of the sampling pattern. //I designed the pattern for offset_bias 1.0, but feel free to experiment. // -- Debug sharpening settings -- #define show_sharpen 0 //[0 or 1] Visualize the strength of the sharpen (multiplied by 4 to see it better) //===========================================// // Technicolor // // Settings // //===========================================// #define TechniAmount 0.40 //[0.00 to 1.00] #define TechniPower 4.00 //[0.00 to 8.00] #define redNegativeAmount 0.88 //[0.00 to 1.00] #define greenNegativeAmount 0.88 //[0.00 to 1.00] #define blueNegativeAmount 0.88 //[0.00 to 1.00] //===========================================// // Cineon DPX // // Settings // //===========================================// #define Red 8.0 //[1.0 to 15.0] #define Green 8.0 //[1.0 to 15.0] #define Blue 8.0 //[1.0 to 15.0] #define ColorGamma 2.5 //[0.1 to 2.5] Adjusts the colorfulness of the effect in a manner similar to Vibrance. 1.0 is neutral. #define DPXSaturation 3.0 //[0.0 to 8.0] Adjust saturation of the effect. 1.0 is neutral. #define RedC 0.36 //[0.60 to 0.20] #define GreenC 0.36 //[0.60 to 0.20] #define BlueC 0.34 //[0.60 to 0.20] #define Blend 0.2 //[0.00 to 1.00] How strong the effect should be. //===========================================// // Monochrome // // Settings // //===========================================// #define Monochrome_conversion_values float3(0.21, 0.72, 0.07) //[0.00 to 1.00] Percentage of RGB to include (should sum up to 1.00) #define Monochrome_color_saturation 0.00 //[0.00 to 2.00] Percentage of saturation to keep. Default is 0.00 , values above 1.00 boost saturation above normal. //===========================================// // Color-Matrix // // Settings // //===========================================// // Red Green Blue #define ColorMatrix_Red float3(0.817, 0.183, 0.000) //[0.00 to 1.00] How much of Red, Green and Blue the new red value should contain #define ColorMatrix_Green float3(0.333, 0.667, 0.000) //[0.00 to 1.00] How much of Red, Green and Blue the new green value should contain #define ColorMatrix_Blue float3(0.000, 0.125, 0.875) //[0.00 to 1.00] How much of Red, Green and Blue the new blue value should contain //Should sum to 1.000 if you don't wish to change the brightness #define ColorMatrix_strength 1.0 //Adjust the strength //===========================================// // Lift Gamma Gain // // Settings // //===========================================// #define RGB_Lift float3(1.020, 1.000, 0.970) //[0.000 to 2.000] Adjust shadows for Red, Green and Blue. #define RGB_Gamma float3(1.000, 1.000, 1.000) //[0.000 to 2.000] Adjust midtones for Red, Green and Blue #define RGB_Gain float3(1.000, 1.010, 1.000) //[0.000 to 2.000] Adjust highlights for Red, Green and Blue //Note that a value of 1.000 is a neutral setting that leave the color unchanged. //===========================================// // Tonemap // // Settings // //===========================================// #define Gamma 0.97 //[0.000 to 2.000] Adjust midtones. 1.000 is neutral. This setting does exactly the same as the one in Lift Gamma Gain, only with less control. #define Exposure 0.000 //[-1.000 to 1.000] Adjust exposure #define Saturation -0.280 //[-1.000 to 1.000] Adjust saturation #define Bleach 0.000 //[0.000 to 1.000] Brightens the shadows and fades the colors #define Defog 0.400 //[0.000 to 1.000] How much of the color tint to remove #define FogColor float3(0.0, 0.024, -0.01) //[0.00 to 2.55, 0.00 to 2.55, 0.00 to 2.55] What color to remove - default is blue //===========================================// // Vibrance // // Settings // //===========================================// #define Vibrance 0.5 //[-1.00 to 1.00] Intelligently saturates (or desaturates if you use negative values) the pixels depending on their original saturation. #define Vibrance_RGB_balance float3(0.6, 0.2, 1.2) //[-10.00 to 10.00,-10.00 to 10.00,-10.00 to 10.00] A per channel multiplier to the Vibrance strength so you can give more boost to certain colors over other //===========================================// // Curves // // Settings // //===========================================// #define Curves_mode 0 //[0|1|2] Choose what to apply contrast to. 0 = Luma, 1 = Chroma, 2 = both Luma and Chroma. Default is 0 (Luma) #define Curves_contrast 0.34 //[-1.00 to 1.00] The amount of contrast you want // -- Advanced curve settings -- #define Curves_formula 2 //[1|2|3|4|5|6|7|8|9|10|11] The contrast s-curve you want to use. //1 = Sine, 2 = Abs split, 3 = Smoothstep, 4 = Exp formula, 5 = Simplified Catmull-Rom (0,0,1,1), 6 = Perlins Smootherstep //7 = Abs add, 8 = Techicolor Cinestyle, 9 = Parabola, 10 = Half-circles. 11 = Polynomial split. //Note that Technicolor Cinestyle is practically identical to Sine, but runs slower. In fact I think the difference might only be due to rounding errors. //I prefer 2 myself, but 3 is a nice alternative with a little more effect (but harsher on the highlight and shadows) and it's the fastest formula. //===========================================// // Sepia // // Settings // //===========================================// #define ColorTone float3(1.40, 1.10, 0.90) //[0.00 to 2.55, 0.00 to 2.55, 0.00 to 2.55] What color to tint the image #define GreyPower 0.11 //[0.00 to 1.00] How much desaturate the image before tinting it #define SepiaPower 0.58 //[0.00 to 1.00] How much to tint the image //===========================================// // Daltonize // // Settings // //===========================================// #define Daltonize_type 1 //[1|2|3] Type of colorblindness. 1 = Protanopia (missing red spectrum), 2 = Deuteranopia (missing green spectrum), 3 = Tritanopia (missing blue spectrum) //===========================================// // Film Grain // // Settings // //===========================================// #define FilmGrain_intensity 0.60 //[0.00 to 1.00] How visible the grain is. Higher is more visible. #define FilmGrain_variance 0.40 //[0.00 to 1.00] Controls the variance of the gaussian noise. Lower values look smoother. #define FilmGrain_SNR 4 //[0 to 16] Higher Signal-to-Noise Ratio values give less grain to brighter pixels. 0 disables this feature. // -- Advanced Film Grain settings -- #define FilmGrain_mean 0.50 //[0.00 to 1.00] The average mean of the gaussian noise. Probably best kept at the middle value (0.50) //A sideeffect of the Film Grain effect is that it also dithers the screen. //You don't need both the Film Grain and the Dither effect enabled at the same time. //===========================================// // Vignette // // Settings // //===========================================// #define VignetteType 1 //[1|2|3] 1 = Original, 2 = New, 3 = TV style #define VignetteRatio 1.00 //[0.15 to 6.00] Sets a width to height ratio. 1.00 (1/1) is perfectly round, while 1.60 (16/10) is 60 % wider than it's high. #define VignetteRadius 1.00 //[-1.00 to 3.00] lower values = stronger radial effect from center #define VignetteAmount -1.00 //[-2.00 to 1.00] Strength of black. -2.00 = Max Black, 1.00 = Max White. #define VignetteSlope 2 //[2 to 16] How far away from the center the change should start to really grow strong (odd numbers cause a larger fps drop than even numbers) #define VignetteCenter float2(0.500, 0.500) //[0.000 to 1.000, 0.000 to 1.000] Center of effect for VignetteType 1. 2 and 3 do not obey this setting. //===========================================// // Dither // // Settings // //===========================================// #define dither_method 1 //[1 or 2] 1 = Ordered dithering (very good and very fast), 2 = Random dithering (different but slightly slower dithering) //Note that the patterns used by Dither, makes an image harder to compress. //This can make your screenshots and video recordings take up more space. //===========================================// // Border // // Settings // //===========================================// #define border_width float2(0,1) //[0 to 2048, 0 to 2048] (X,Y)-width of the border. Measured in pixels. If this is set to 0,0 then the border_ratio will be used instead #define border_ratio float(2.35 / 1.0) //[0.1000 to 10.0000] Set the desired ratio for the visible area. You MUST use floating point - Integers do not work right. //Examples that work: (1680.0 / 1050.0), (16.0 / 10.0), (1.6) Examples that does NOT work right: (1680 / 1050), (16 / 10) #define border_color float3(180, 0, 0) //[0 to 255, 0 to 255, 0 to 255] What color the border should be. In integer RGB colors, meaning 0,0,0 is black and 255,255,255 is full white. //===========================================// // Splitscreen // // Settings // //===========================================// #define splitscreen_mode 1 //[1|2|3] 1 = Vertical 50/50 split, 2 = Vertical 25/50/25 split, 3 = Vertical 50/50 angled split, //[4|5|6] 4 = Horizontal 50/50 split, 5 = Horizontal 25/50/25 split, 6 = Curvy vertical 50/50 split //===========================================// // Transition // // Settings // //===========================================// #define Transition_time 5000 //[1 to 60000] Milliseconds the transition lasts (1000 milliseconds is 1 second) #define Transition_texture "curtain.jpg" //["filename"] Filename for the texture to use. Put your custom textures in SweetFX/Textures/ #define Transition_texture_width 720 //Image width. #define Transition_texture_height 480 //Image height. #define Transition_type CurtainOpen //Can be "FadeIn", "FadeOut", "CurtainOpen", "CurtainClose" or "ImageFadeOut" //===========================================// // Display // // Depth // //===========================================// #define Depth_z_near 0.01 //[0.00001 to 100000.0] Camera z near #define Depth_z_far 100.00 //[0.00001 to 100000.0] Camera z far, must be further than the near value. //===========================================// // Custom // // Settings // //===========================================// #define custom_strength 1.0 //[0.00 to 1.00] Adjust the strength of the effect

Comments

Beasthunt
16 Apr 16:20 CEST

Thanks for the response. I am but I will keep working at it. I finally got one to work but it was the NextGenFX settings and it's too dark for me. Yours look spectacular and I can't wait to get it working.

K-putt
16 Apr 03:19 CEST

Are you using the right SweetFX/Injector version? I linked them in the description. I'll ask CeeJay tomorrow if he knows what's up if that doesn't help.

Beasthunt
16 Apr 02:12 CEST

Hey man i've been trying all day to get this to work but I keep getting this error.

G:\Assassin's Creed Rogue\SweetFx\Shaders\SMAA.h(445, 1): error X3000: syntax error: unexpected reserved word 'SampleState'

Got any experience for that? I've made sure all of my saved files are ANSI.

Moloch
20 Mar 22:51 CET

great preset! works fine with preview 8 as well

K-putt
15 Mar 19:27 CET

Leave it at 12. I compared them a while ago and it looked like 12 is the best. And yes, if you do enable SMAA, disable FXAA. 2 post-aa solutions at the same time produce artifacts.

CROcodile20
15 Mar 18:17 CET

Wow man, you`re a genious! :D That was the problem, my sweetfx_settings.txt file was in UTF-8 format, I changed it to ANSI and voila, everything works. Thanks again.

I assume I should disable the ingame FXAA when using SMAA via sweetFX, right ?

What about "SMAA_MAX_SEARCH_STEPS_DIAG", should I put it to 16 (highest) or leave it at 12 ?

K-putt
15 Mar 17:41 CET

Just tried it.. and it works just fine here. So you must have done something wrong in the process.

Perhaps it's your editor setting. Some people change it to save in a Unicode format for some reason. Save it in a ANSI format.

CROcodile20
15 Mar 10:50 CET

I forgot to notice, your preset works just fine when I don`t make any change in the file. But I want to try out SMAA...

CROcodile20
15 Mar 10:26 CET

Hey K-putt, thanks for this awesome preset. I have a question.

I have enabled SMAA like in the instructions (USE_SMAA 1, USE_FXAA 0), but the sweefx fails everytime on startup (I can play the game, but no sweetfx).
I`m using the latest sweetfx 2.0 + reshade 0.15., Windows 8.1 Pro x64

Tnx in advance!

K-putt
15 Mar 08:15 CET

It might be the ReShade version. I uploaded a beta.. of the beta version. Crosire already has a working 0.16 version of his injector. Should be online any day now. Perhaps that fixes the problem. You should also ask those questions on the Reshade forums. Crosire is pretty active there - http://reshade.me/forum/index

RiiNeYScOo
15 Mar 02:51 CET

K-putt I am French, I use Google translation so sorry if this is not very consistent ^^
With your sweet fx 2.0 not only sweet fx is not detected in this game, but in all the others, I had to return to 1.5 for it to re-work an idea what's wrong? And although I have Visual C ++ 2012 Redistributable ...

K-putt
9 Mar 16:18 CET

ReShade should work just fine for you. Must be another overlay that's causing problems for you. Uplays overlay usually causes crashes with SweetFX.

Or maybe you don't have the Visual C++ 2012 Redistributable installed?

https://www.microsoft.com/en-us/download/details.aspx?id=30679

Blanky
9 Mar 16:14 CET

uooooo is a great work, would you please make one preset to use only sweetfx 1.5 without using reshade? is that I need it to work with RadeonPro and Reshade not work well for me, would be helpful for me if I could do or tell me how you could use the preset without reshade, thanks heart.

You need to be logged in to post a comment